Hi,
Have just bought a 95 9000cse 2.0 Ecopower with 65,000 miles but the engine will suddenly lose power and finally stall whilst driving. It seems to happen during warm up. Saab garage found fault codes P0505 (idle valve) and P0325 (knock sensor). Garage cleaned everything out including contacts and everything tested ok but stalled again. Garage are replacing the idle valve just to eliminate that and I've read about similar problems on the forum but wondered if anyone had seen these two fault codes together? Thanks.
Have just bought a 95 9000cse 2.0 Ecopower with 65,000 miles but the engine will suddenly lose power and finally stall whilst driving. It seems to happen during warm up. Saab garage found fault codes P0505 (idle valve) and P0325 (knock sensor). Garage cleaned everything out including contacts and everything tested ok but stalled again. Garage are replacing the idle valve just to eliminate that and I've read about similar problems on the forum but wondered if anyone had seen these two fault codes together? Thanks.
