[ballistic]

I'm about to get some poly bushes for the rear ARB on my 1996 CDE 2.3T.

Elkparts list a set for 18mm diameter and a set for 19mm diameter bars.

Which one would mine be?

Ash

 

[carl.rose]

To the best of my knowledge, 19mm bars are only found on Aeros

 

[john]

Previously discussed at: http://www.saabscene.co.uk/cgi-bin/ultimat...2905;p=1#000000

 

[scminks]

use an 18mm and a 19mm open ended spanner

 

[mark e]

CS=19mm
CC=18mm (mainly)
CD=18mm (some later MYs might have 19)

 

[adrian]

The guys at Elkparts also have 18mm and 19mm poly bushes and could actually tell me which size I needed for my two CSs (19mm).

 

[wrighar]

Originally posted by Swapped my 9-5 for a 9000 Aero:
[qb]To the best of my knowledge, 19mm bars are only found on Aeros [/qb][/b]

My 9000 CC Craly has a mix on 18 and 19 mm ARB's, just to be confusing.

 

[mark e]

Not at all confusing, Andrew. AFAIK all front ARBs were 19mm, it's the rear that varied

 

[scminks]

ive seen 18mm and 19mm ARB poly bushes for both front and rear Mark.but if he uses the spanners as a guage...

 

[mark e]

[pedant]But it's the rear that were being asked about[/pedant]

 

[ballistic]

Well I bought both sizes just in case. Fitted them tonight and it was 18".

[FX: Runs inside to Wife] "Look Lou, I've got an 18 incher!"

Ash