Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 1 of 1 Posts

·
Registered
Joined
·
722 Posts
Discussion Starter · #1 ·
Unplugged sensor (back of engine-2 plugs 1 with 1 wire and tubular connector, the other with 2 wires and black solenoid valve type of connector with silver retaining clip). I unplugged the black plastic 2 wire plug, expecting base boost. I got full boost.Why!? My boost problem was still there and performance was same. I timed
30-70mph average of 7.4secs a while ago.hmmm.thats bad.(well its still pretty quick but not quick as should be)
(Reason why I was unplugging?Boost problems:excessive boost taper at high revs-thought it was knock sensor picking up noise, so was just messing to see if I could isolate the problem....)
 
1 - 1 of 1 Posts
Top