Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi all,

2005 9-3 Tid, has failed the MOT on worn inner tie rod ball joints. I have the parts and was going to tackle the replacement first thing in the morning, however have just been reading up and everyone seems to suggest the "special" tool is required, however on the Vx forums some are saying that they have managed it on full lock with a pair of stilsons!

Does anyone have first hand experience at this and able to advise whether I'm going to manage it myself without the tool?

Thanks in advance.....
 
1 - 3 of 3 Posts
Top