Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 3 of 3 Posts

·
Registered
Joined
·
444 Posts
Discussion Starter · #1 ·
Dear all
Just done a simple but neat mod to my motor to change the high level brake light from bulbs to LED's (bulbs were a pain..kept blowing and went dull when the holders corroded). Any interest and I'll post on how to do it..cost me about £8..probably cheaper than a set of bulbs.Fits in standard casing etc.
Anthony
 

·
Registered
Joined
·
1,245 Posts
Please post your mod Anthony. I would have no problems doing it myself but it helps if someone has already done the research :)
I've already fitted high intensity LEDs to my Ducati to supplement the existing single bulb, in case it blows. I wired them so that they are normally a similar intensity to the tail light but full brightness when the brake is applied. I'd be happy to pass on details to any other motorcyclists on the list.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top