Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 6 of 6 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
I bought these for my Aero but have decided that due to a combination of overall happiness with my Abbott springs and laziness on my part (ie being bothered to fit them), I am letting them go.

They are unused, I got them from a guy who bought them by mistake. They are coded 30 SA 05, this corresponds to a fitment for post 92 CS 9000s (ie any post 92 CS/CSE/Aero).

I will get some pics up shortly but as I say they are basically as new.

£75 plus postage (which I get a good deal on so won't be much).


Rohan
 

·
Registered
Joined
·
8,948 Posts
Code:
SAAB     YEAR      CHASSIS TYPE      SPRING KIT PART #      NOTE      MM LOWERING
9-3 excluding Cabriolet     3.98>     9-3     30 SA 01           35
9-5 excluding V6/Estate     10.97>     9-5     30 SA 02           35
99 +900 Including Turbo     79-93           30 SA 08           40
900 4 cylinder     9.93-3.98     900     30 SA 03           35
900 6 cylinder     9.93-3.98     900     30 SA 04           35
9000 CS     1992>           30 SA 05           40
9000 + Turbo/CS/2.3     86-91     9000     30 SA 06           35
9000 + Turbo/CS/2.3     86-91           30 SA 07L           60
 

·
Registered
Joined
·
8,948 Posts
No they don't



9000 CS 1992
Price: £125.81 (including 15 % tax)

Ask a question about this product When you are going low it's important to get the right kit for the job.

With the GMax advantage you get the benefit of much improved handling but without sacrificing ride quality too much.

Benefits:
  • Uprated Lowered Spring Set
  • Improved Handling
  • Top Quality Manufacturing Processes
  • Slammed look
  • Best Value Spring Kit
  • Manufacturer 3 year Warranty
  • Easy Direct Fit
Part Number: 30 SA 05

Lowers by: 40 mm

Note: N/A



'
Having said that, I just looked them up here and they claim they're for a 9000 Turbo MY86-91

Can anyone advise if they'll fit a MY96???


GMAX Springs[/b]
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #6 ·
I am afraid there is an almighty cock-up- the springs have been wrongly coded at the factory and won't fit ANY 9000!!

Despite each one being stamped 30 SA 05 they are actually springs for a GM900/9-3.

Withdrawn from sale........
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top