Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 2 of 18 Posts

· Registered
Joined
·
3,615 Posts
Maptun. From everything I've read, I'd say that Maptun would be the people to buy the upgrade from. They understand Saabs.

BSR, the maker of the 'Speedparts' chip upgrade are a general tuner (kind of like Superchips), who do ECU chip upgrades for lots of other cars so can't possibly put in the development time needed to hone a product.

Maptun however are ex-saab factory. They only deal in Saabs. They have access to knowledge, testing, training, documentation material and people that BSR probably don't have.

The HP isn't the issue.. it's the max torque you will ask the box to deal with. The box is rated to be able to handle 290NM.. push it much over that and you may encounter problems. Also note that the shift patterns will be slightly screwed up with the very different torque curve.
 

· Registered
Joined
·
3,615 Posts
Your at about 210/220NM as standard .. With +130NM or +140NM obviously you'll be sitting with about 40NM to 50NM more than your box is rated to take ?

i.e. neither of the upgrades is comfortably lower than the manufactured limit of your box... they are both HIGHER!

Aside from the quality of the mapping from Maptun, the lower torque of the maptun ecu will preserve your box.
 
1 - 2 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top