Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 5 of 5 Posts

·
Registered
Joined
·
234 Posts
Discussion Starter · #1 ·
All the windows in my 9000XS (J) go down flush with the door EXCEPT the drivers one which stayes about 3" high.

Before I take the door panel off is there something I should know?

TIA

Ian
 

·
Registered
Joined
·
5,925 Posts
Think you'll need to take the panel off anyway to see what condition the teeth on the cog thing is.

I've seen this posted ages ago, and can't remember what else to suggest.

Have you got a scrappie near to you if you need the parts?

Kevin Mc
 

·
Registered
Joined
·
234 Posts
Discussion Starter · #3 ·
I have now taken the panel off and found out what the problem is.

At the base of vertical rail in centre of the door is a bracket which is welded on. This weld has snaped and has been fixed with a nut & bolt hense the fact the slider will not go all the way down.

Anybody got an old rail in the shed?

Ian
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top