Saabscene Saab Forum - Saab Technical Information Resource banner

dawes device a con ?

2K views 8 replies 4 participants last post by  mark e 
Ive not had ne problems with mine.
although i did get the race version which is more responsive.

Have you tried running it off the intake manifod nipple ?
May be your wastegate diaphram is too weak to hold it constant?

You could e mail darren dawes in the usa - I found him very helpfull when I was getting technical info on the D device. Darren Dawes <Darren@DawesDevices.com>

Ill try and have a think on it - see if I can come up with an explaination.

Damo
 
ylee coyote,

I know this is a daft question - but you have blocked off the pipe from the apc solenoid ?

Where exactly are you taking the vacuum/pressure from?

You could try taking it from the Y splitter at the back of the engine bay/bulkhead, this comes off the manifold and splits to the dump valve & boost gauge (I assume as it goes into dashboard area).
You may for some reason have a differing vacuum from separate sources?

Damian
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top