Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 2 of 2 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hey Guys! Happy New Year from the good old USA!

I've got this problem with my Clutch master cylinder, to wit, it doesn't work.

This is a '87 9000 Turbo that has slowly lost pedal to the point where, when bled out, will only give about 1/4 throw.

The brakes are strong and share the same reservoir, but repeated bleeding of the clutch has no effect.

I hate to spend what is being asked for a new master cylinder and was wondering about how much sense it makes to try to replace the seals in one this old.

Has anyone out there got a used replacement for cheap, or a suggestion on which approach might be best? Is there a non-Saab replacement that might work?

HELP!!!!

John
’87 Saab 9000 Turbo
’76 911 S Targa
’86 944 N/A
’90 Bronco II
’87 Carrera (totaled)
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
Thanks, Mark, I had the same doubts about doing a rebuild kit. The connecting hose is a good idea and one that I will use. Thanks again.
John
 
1 - 2 of 2 Posts
Top