Saabscene Saab Forum - Saab Technical Information Resource banner

C900 Side Indicator Position

3K views 4 replies 2 participants last post by  efcbluepete 
#1 ·
Hi,

My C900 (bought a couple of years back, been getting stripped out and restored over the last year or so), has replacement wings on it now, but they don't have the indicator cut out for the later models (mine is a '91).

would anybody out there be so kind as to take some approx measurements for from the door to start of indicator (horizontal), and from bonnet to start of indicator (vertical). My paint shop will put the holes in based on the indicators, and I don't think them being +/- 5mm or so will make a great deal of difference.

My thoughts were that the horizontal measurement could be with a tape measure hooked to the wing as it meets the door, the vertical could be with a tape measure hooked to the top of the wing.

Hopefully a simple ask, and would be very much appreciated.

Thanks,

Pete
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top