[MikeH]

We are about to complete the installation of my engine and gearbox.problem is that owing to my helper deciding to skive off and have a stroke at a very inconvenient time (he is monitoring this)we cannot remember which pipe went were,so can someone shuffty their motor and let me know?
Thanks in advance
Mike

 

[Julian]

The hose connectors on the APC solenoid are labeled C, W and R.

Hose from the C connector goes to the nipple on the turbo compressor housing. Hose from W goes to the wastegate actuator. Hose from R goes to the pipework on the inlet side of the turbo.

 

[mark e]

Just to add for clarity, the ports from top to bottom on the solenoid run

C
W
R


Mark

 

[MikeH]

Thank you gentlemen,and with the speed of light.
Judging by the bits left on the bench,I may well be back in the very near future
Mike