Saabscene Saab Forum - Saab Technical Information Resource banner
1 - 4 of 4 Posts

·
Registered
Joined
·
283 Posts
Hi Saabeltann,
As these wheels are 4 stud and for a ´93 Classic 900, which will have the handbrake on the rear, then they should fit a 9000 with no problem at all. Hope that helps
DeeVee
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
Nice one. thanks for the info
I'll go take a look at them tomorrow.

BTW just out of interest, how does the position of the handbrake affect which wheels are suitable? Does it make for a bulkier rear wheel hub?
 

·
Registered
Joined
·
8,948 Posts
1988 on 900's had the same wheel PDC and hubs as the 900's so they will fit.

up to 1987 900 wheels used nuts not bolts, the bolts PDC was different and their was a 5th small hole for the late 900 / 9000 locating peg.

Looking at the alloys in the picture, I can't see that 5th small hole (between a part of bolt holes) so I'd be wary of them fitting.

Andrew
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top