[jaypaz1]

Greetings. I am gonna replace my PCV and the Oil Pressure Switch. Any tutorials and or directions on here for these?? Let me know. Thx

 

[nickharman]

I think the Haynes manual may be your best guide.

 

[any-mgzt]

Search Google for saab wis, download and install it's more detailed than haynes manuals and it's free.

If you can't find it pm me and I will try to send it to you.

Sent from my CLT-L29 using Tapatalk

 

[aerojon]

the pcv valve is located in the inlet manifold..

 

[nickharman]

Search Google for saab wis, download and install it's more detailed than haynes manuals and it's free.

If you can't find it pm me and I will try to send it to you.

Sent from my CLT-L29 using Tapatalk

The WIS is good but there are no pictures and it is slightly difficult to use under the car!

 

[aerojon]

what's wrong with the op switch not a common failure on the B207 engine..

 

[macfarl99]

I don't know about the oil pressure switch but I was planning to replace the PCV valve in my 9-3 (B207L) and found this very good video on how to do it. Hope it helps others looking for the same thing: