Saabscene Saab Forum - Saab Technical Information Resource banner

121 - 140 of 177 Posts

·
Registered
Joined
·
214 Posts
Discussion Starter #123
The dash cracks are being repaired. Polyvance products being used for the first time.
53041
 

·
Registered
Joined
·
214 Posts
Discussion Starter #126
Almost done with the dash top repairs. Will see if the valleys are still visible after full cure time. May have to top coat.
 

·
Registered
Joined
·
214 Posts
Discussion Starter #130
RH side floor pan was perforated by the jack point. Welding in support plates and new floor patch. Video soon.

53065

53066
 

·
Registered
Joined
·
214 Posts
Discussion Starter #131
New water pump is on. New belt tensioner and belt. AC compressor coil is too weak to hold the pulley. Not sure how to proceed yet. 500USD for a new compressor is over 2X what I paid for the car. Junk yard wants 60 for 93 AC compressor assembly, but I think it is a Sanden. Mine has a Seiko R134a compressor. Second 85A urethane knob casting came out nice. One more vent to do on my car.

53067

53068
 

·
Registered
Joined
·
214 Posts
Discussion Starter #136
Driver seat needed a major cleanout. So much decayed burlap in every crevice. The heater pad is not working and the front lift sounds like it is missing a gear tooth.

53094
 

·
Registered
Joined
·
214 Posts
Discussion Starter #137
Heater pad had a broken segment, soldered and it's working. Soaking the bottom cover, hoping it can be refreshed. Will probably dig into the seat motors tonight after I pull off the back pad and cover.
 
121 - 140 of 177 Posts
Top