Search Results for ‘tubing’

While replacing some tubing on the top left of the direct ignition I broke the plastic piece which receives two separate rubber tubes. I am trying to figure out what this part is and if I need to replace it, or possibly use some sort of sealing tape. Any help would be huge on this. Its a 1995...

Hello all, I am new in the forum and in the Saab World (H**l, I am even new in the UK)! The status: Car: 1999 Saab 9-3 2.0SE (turbo) convertible In Derby Changed serpentine belt due to slipping, the belt caused a hydraulic surge and i have at least one diagnosed leak of power steering...

I'm going to be bleeding the brake and hydraulic clutch fluid in the near future. Anyone know of a good size for the vinyl tubing for the bleed nipples? Would 3/8" work OK? Also, for bleeding the clutch, is it advisable to finish the routine by bleeding the reservoir? Thanks :)

Just replaced an auto box on a MY93 9000 2.3 FTP CSE with TCS. In the process I lost track of the positioning of all the vacuum tubing - most of it was stiff, brittle and perished. I have got the car running ok but the TCS and ABS lights are on now when they weren't before i changed the box...

I noticed this weekend that the silicon tubing going from the cam cover to the inlet manifold has gone dark and looked like it was sweaty. Anyone got any idea what could cause this? Does it indicate a problem with my car or could it be duff tubing? I thought silicon should be able to stand...

2000 9-5 SE V6. Awhile ago I posted about blue smoke on cold starting. I have been meaning to look inside the intake tubing like someone had instructed me to do. I finally got to it this weekend and sure enough there is oil in there but it seems to be coming from the throttle body and not...

After building and installing my custom full 3" intake I am considering replacing all the tubing from the turbo to the intercooler and from the intercooler to the throttle body. I am not sure what size tubing to use and was hoping for some different opinions. I was originally considering using...

After building and installing my custom full 3" intake I am considering replacing all the tubing from the turbo to the intercooler and from the intercooler to the throttle body. I am not sure what size tubing to use and was hoping for some different opinions. I was originally considering using...