Search Results for ‘torque’

I crossed paths with a gentleman in China of all places who spent some time as a stylist at Saab back in the day. We were comparing Saab stories when I brought up the amount of torque steer in my 2002 Viggen coupe. He pointed me to the write up about it below. My question is, any one have an...

We just spotted an Autoguide.com favorite 1/2" drive torque wrench on sale via Amazon.com. The Tekton 1/2" drive torque wrench is rated for 10/150 ft.-lb. and features sturdy all metal construction. With the current 29% discount, it's priced at only $28.50! Read More About The Torque...

I have a bluetooth ELM-327 OBD-II reader connected to my phone with Torque Pro. All the readings look pretty sensoble but I can't fathom what's going on with the Inlet Manifold Pressure on my 9-5 2.3t Vector (LPT). Engine off it sits at ~14.5psi, exactly where I'd expect at atmospheric...

What are the torque specs om the flywheel and pressure plate for my '03 9-3 6-speed?

Valve,cam or rocker...Not sure of the official name, but regardless, one is leaking. I can't find the fastening torque anywhere and I'm hoping someone can help here. On more modern vehicles the gaskets are normally fitted dry although there are some cars, like a BMW e39, I once owned, which...

9-5 2005 manual petrol Mine is slack on the engine side - ok on the subframe side. Has anyone fitted the powerflex bush(es) and how do you find them for vibration. I assume it sorted the slackness> Any info appreciated. Dave

Hey everyone. I have one of the first Steering clamps for my car from MP Performance .. not sure where they are nowadays.. but their steering clamp worked well on the standard tranny setup for a ng900. I now have a quaife LSD tranny.. and probably double the power. Does anyone have any advice...

http://www.carthrottle.com/this-explosive-saab-9-5-r-is-an-unhinged-supercar-slayer/ Now i love that someone has tuned this engine to this level and show how ingenuity, desire and a big fat wallet can produce stupidly high bhp without going BANG. But, the lower powered (relatively speaking)...

http://www.youtube.com/watch?v=KhPtHkAkIFU https://play.google.com/store/apps/details?id=org.prowl.torque&hl=en might treat myself to this but would like some feedback first

this is an update to my daughters 2001 saa 93 2.0 turbo, she has been riding it without the maf plugged and its been driving fine, then last night it would not start. it appears to want to start but wont turn over, the code that comes up is the 0743 but no mechanic or transmission expert knows...

What is the torque for a 2006 saab 1.9 tid 150bhp front wheel bearing hub assembly?

I took all the airbox, tensioner and front wheel cover plate off .......and whoaaaaa Bottom torque bolt on Alternator Obviously the last 'Backyard mechanic' couldnt tell the difference between Torque and Allen key!!!! So now I may have to sell the car all for the sake of a dumb bolt :confused:

So as the title says clutch is slipping ( sometimes ) at max torque ( carbon Kevlar rated @550nm but running under 500 ) also if left a while I lose bleed on clutch peddle it stays down once pressed until pumped a little ! Also loosing dot4 !! Seems to me release bearing failure flying fluid on...

Hello guys, I am new to this forum and need help on a situation with my car. I have a 4D Automatic Hatchback Saab 99' 9-3 Turbo SE. I purchased it with 144,000 miles and now it is at 152,000. Just recently I was driving at 45mph and my car was losing power( even when I put foot all the...

hello all wanted to ask about bhp and torque. I have to confess, I dont know a lot about these things but the people on this forum seem to quite friendly so hopefully i wont get shot down. when looking at performance stats for a car, do you have to look at other things or is just the BHP a...

I've got a 2.3 HOT aero -2007, 35K miles. I've noticed a few times over the past couple of months that there is a lack of power/hesitation sometimes when accelerating. The time it's most noticeable is on a motorway at about 70mph in top gear. Put your foot down and the acceleration is very...

My pads and discs look about ready to change. Just checked my Haynes manual for specs and it says the torque for front caliper bracket is 210Nm + 30deg, rear 130Nm + further 45deg. The front torque seems incredibly high - more like the kind of value to hold hub nuts on! Does anyone please know...

I have a T16, FPT and get serious torque steer in 2nd and now 3rd ( MBC @ 16--18-psi ), Pulls to the right !!, Is this normal i.e Its my fault for being overweight !!, or is there somthing mysterious going on that should be addressed ????. I let the wolf out earlier against a VW R32, the c900...

I need a list of the Torque Settings for my 9-3 2.0i (1999). Where can I find or buy such a list? Thanks for your advice Bill

I’m going to replace the bushes on the rear torque arms (with Superflex bushes), & once the job is done the final tightening of the torque arms obviously needs to be done with the wheels back on the ground. My question is… how do you access the bolts to do this once the cars back on terra firma...