Saabscene Saab Forum - Saab Technical Information Resource banner
tear
1-6 of 6 Results
  1. Saabscene: Performance
    Hello all, I have been transferring suspension bits over from my old 9k to my new one, namely today swapping my suspension arms over, and have noticed that all my poly bushes are not as good as expected. The worst ones are the front suspension arm rear bushes, which have a good few mm play in...
  2. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    When looking for a car I noticed that lots that i looked at had holes worn in the same place on the roof. Namely above the rear window on the drivers side. In most cases the rest of the roof was perfect. So, the question is: Why do they wear at that point only & what can be done to prevent it...
  3. Classic Saab 900 (1979 - 1993)
    Just found a nasty rip in my hood and cant afford to have it fixed right now,has anybody got any repair tips that dont make it look too crappy from the outside? Thanks Dave
  4. Saab 9000 (1984 - 1998)
    Hi, Has anyone have an idea how long the front wheel ball joints last?? I have to change mine every 30K kilometers. It is a job easily done in an hour, but I have the impression the quality could be a lot better. Does anyone have a better experience with another brand than the originals of...
  5. Saab 9000 (1984 - 1998)
    after much um-ing and ah-ing,I've decided to keep my beloved 1992 2.3cs and sort out the faulty bits- 1 replace radiator& heater matrix& 3 coolant hoses 2 replace o/s mirror 3 replace driver's door lock 4 fix intermittent alarm fault(activates, then won't deactivate) usually after few days 5...
  6. Saab 9000 (1984 - 1998)
    after much um-ing and ah-ing,I've decided to keep my beloved 1992 2.3cs and sort out the faulty bits- 1 replace radiator& heater matrix& 3 coolant hoses 2 replace o/s mirror 3 replace driver's door lock 4 fix intermittent alarm fault(activates, then won't deactivate) usually after few days 5...
1-6 of 6 Results
Top