I'm replacing the GT17 in my 2005 Vector with a TD04. I have everything I need except the turbo! I don't really want to go for a Chinese clone if I can help it. Anybody have a good one - with no shaft play, as they say?

I have a 2004 Saab 9-3 2.0T aero, however the turbo has some play in the shaft and i want to replace it with a brand new turbo. Am I right in thinking its a TD04 as standard please? Thanks

hi im in need of a td04 turbo with pipes and banjos if possible asap thanks

Hi guys, I've trawled the posts and there is much discussion on this very topic - but I thought I'd raise it again to get the latest feedback, as many of the posts are a few years old now. My beloved 2002 2.3t auto has suffered turbo failure. I was very lucky and managed to get it the few...

I have a TD04 turbocharger surplus to requirements,will come with Aero 'cobra pipe.Also have a 9-3 Hot Aero T7 ECU.Sensible offers invited. Bob

Hi all, I'm planning to do a TD04 conversion on my "1.8"t 9-3 2004 My first question is, when installing the simota intake there is a little extra thing you have to do on the aero, what is this? why dont i have it? is it related to the different turbo ?will i need it for the conversion? if not...

Has anybody got a scrap Mitsubushi turbo that I can buy for reasonably money. I only need the exhaust housing as my wastegate poppet valves fallen off. Or, I can swop for parts if preferred. I'm at Notts. Thanks. Mike.

i have a 900 with a B204L.. ive found a 900 convertable with a td04 turbo i can have, if i get the turbo,oil pipes and water pipes will it bolt up to my exhaust and will my original intercooler/intake pipes fit? does anyone have pics of before/after this conversion or a guide? cheers for any help

Hi got a TD04 £130 pm me thanks

In search of a TD04! Feel free to email me at [email protected] Thanks! Rob

hi all. i am in need of a mitsubishi td04, to break into my next stage. if anyone has one, or know of anyone going, please pm me. these are becoming harder to find. kev

Both SAAB Fitment Mitsubishi TD04 removed from a saab 9-5 aero needs a rebuild, Good for a hybrid rebuild maybe? Here is info and pics of the turbo I can't see any obvious movement in the shaft when spinning it or wiggling it about. I think it is seals that are shot, But there was a lack of...

Guys, I now know that the oil feed, coolant feed and coolant return banjo bolt sizes on the TD04 are all M12 x 1.5 pitch. Can anyone here advise on sizes of the other ends of the oil and coolant feed pipes please ? Are they M12 or M14 ? Trying to ascertain without having to dismantle them to...

In good condition, no end play. comes with inlet pipe and both water hoses. no longer needed so is up for grabs for £150 + delivery first one to pays ya money gets it!! Karl

I have lost the R-pin off the wastegate boss. Happened 200mls from home but no real problem on the motorway home. Maintained a decent lick without the turbo. Trouble is the remains of the pin are stuck in the hole and bits of bent wire don't work. I am thinking to drop the JT downpipe to give me...

I was just wondering what the numbers on the exhaust side of the turbo housing mean? (see picture) Does it have to do with the exhaust manifold side flange? Thanks!

Exactly one month ago I placed an order with Elkparts for a TD04. I was told because they were out of stock it would be a 7-10 day wait. Hmm ok then, i can wait. One month later and after I had to keep calling them to find out the situation I cancelled the order. Surely if I had a customer that...

To cut a very long and annoying story short, I was engaged in overhauling my aero turbo last night. the job was going very well until I went to nip up the left hand nut holding the compressor wheel on. CRACK, the shaft sheared in half. After throwing my tools on the floor etc I have come to...

Does anyone have any idea where the best place to purchase an overhaul kit for an aero turbo is?