Saabscene Saab Forum - Saab Technical Information Resource banner

Discussions Showcase Albums Media Media Comments Tags

1-3 of 3 Results
  1. Help, Advice, Saabs and Motoring
    A couple of years ago i noticed the swirl flap connecting bar had fallen off and would not go back on as the ball tab had broken off the no.3 turret. So i turned them to the open position and it was fine but recently i have been getting the intake air leak detected fault code and a loss of boost...
  2. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi everyone, a few separate questions here: 1. I have blanked off the EGR and I'm getting the engine light come on, which I was expecting. I know that I can get rid of it by drilling a hole in the blanking plate, although I would prefer not to if there was maybe another way, like...
  3. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi there saab owners, What do you think about disconecting the actuator rod from nr.3 flap from the bottom of the inlet manifold by prising it off the ball joint and just leave it moving around disconected and fix all the flaps in open position? so the car will thing everithing is ok but the...
1-3 of 3 Results
Top