Saabscene Saab Forum - Saab Technical Information Resource banner

Discussions Showcase Albums Media Media Comments Tags

1-6 of 6 Results
  1. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hey, my 2001 93 SE convertible had a non working hood lift support since I bought the car and I finally replaced it by a new Stabilus SG318003 lift support. The hood stayed open after replacing the part as supposed to but not anymore a few days later. The lift support can't keep the hood open so...
  2. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi Everyone Has anybody had any problems with the metal Wing mirror supports coroding, or flaking. Both of mine are badly, the metal coating has flaked off in certain areas and it has become oxidised (turned flaky white), and also the paint is bubbling in a few areas. My car is a 93ss Aero...
  3. Saab 9000 (1984 - 1998)
    Hello all. '93 9K CDE, non-turbo, auto. The next repair I'm planning is to replace the control arm front bushing supports. I'm getting a clicking sound when going over small bumps at low speed. I checked them out, and 3 of the 4 are broken. I've got the service manual and it looks relatively...
  4. Saab 9000 (1984 - 1998)
    Hello all. '93 9K CDE, non-turbo, auto. The next repair I'm planning is to replace the control arm front bushing supports. I'm getting a clicking sound when going over small bumps at low speed. I checked them out, and 3 of the 4 are broken. I've got the service manual and it looks relatively...
  5. Saab 9000 (1984 - 1998)
    I replaced all of the front wishbone bushing bearing supports at the weekend and it turned out to be a pig of a job. First of all, all of the nuts on the subframe bolts were well seized on and heat couldn't be safely applied because of their proximity tot he rubber bushing. They are 16mm hex but...
  6. Saab 9000 (1984 - 1998)
    I replaced all of the front wishbone bushing bearing supports at the weekend and it turned out to be a pig of a job. First of all, all of the nuts on the subframe bolts were well seized on and heat couldn't be safely applied because of their proximity tot he rubber bushing. They are 16mm hex but...
1-6 of 6 Results
Top