Hi all. I,ve been having problems with my rear brakes sticking. saab vector 150 diesel. i,ve bought a wheel/brake cylinder repair kit because its a lot cheaper than new callipers. done the front a few weeks ago. I cant figure out how to remove the rear callipers from the handbrake cable...

Unfortunately I own a 2006 150Diesel 9-3 saloon, purchased new, now with 105K miles and it's only ever been to the same main dealer for service It recently made it home thanks to the RAC (again) after the water pump has seized. I have now replaced the cam belt, tenisoner, idler gear, water...

As the title says, that's the problem I've got. Story is, I got a flat, got the tyre changed, it then went flat again right away. Was away for a bit, by the time I got round to looking at it battery was flat, then by the time I got round to sorting that, the brakes had siezed. So the car's been...

I have had my 93 2001 2.2tid for 4years very little trouble if any, serviced every year by a local saab specialist.Until last friday night the car starting mis firing then came to a to a sudden hault,i had it lifted and dropped at the local saab man who tells me its siezed only 85000 mls on the...

hello all, done a bad thing today, serpentine belt broke/come off and i tried to get the car home (big mistake)the engine seized after about a mile, i was watching the temperature guage to make sure it didn't boil up but i did not realise that the water was not circulating because of the broken...

Just went to fit new front discs. Unfortunately the old one's appear to have siezed on! I have removed the allen key retaining screw. Anyone else experienced this? If so any suggestions on how to get them off? I have tried a lever behid the disk, a sharp blow with a hammer and a lever into the...

Tried to have the tracking sorted this morning but Kwik-fit were unable to do so because the nuts were siezed. How can I get htis sorted - the car is in for service soon so I need to know what to ask for please.

I have a problem in that my 9-5 is due its MOT test. It needed three tyres only the locking wheel bolts were very siezed in . The problem is when attempting to get the third bolt out, the socket with the matching pins in has snapped all the pins off . Now with the MOT test immenent I have...

My '93 2.0Lpt has just failed its MOT as the handbrake is not working on one wheel. The Caliper appears to be siezed. (ie. no movement on handbrake level at all). Caliper works from foot brake fine. Has anyone experienced this problem? Is it worth stripping the caliper or should I just get a...

My '93 2.0Lpt has just failed its MOT as the handbrake is not working on one wheel. The Caliper appears to be siezed. (ie. no movement on handbrake level at all). Caliper works from foot brake fine. Has anyone experienced this problem? Is it worth stripping the caliper or should I just get a...