Saabscene Saab Forum - Saab Technical Information Resource banner
shafts
1-13 of 13 Results
  1. Saab Parts / Accessories, FOR SALE and WANTED
    is there anyone out there selling 9000 drive shafts complete or possible whole car if cheap needs to be fpt
  2. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    2001 - 9-3 SE Timing marks for crank, Cam shafts and Counter balance shafts needed. My engine blew a piston (#3) the chain guide (intake side) got broken while cylinder head was removed, I need to get clear specifications on timing marks, could you please help? Also I will like to have an...
  3. Saabscene: Performance
    On Ebay recently there is a Saab Turbo engine for sale with balance shafts removed. I was curious about this and emailed the seller for an explanation. He explained that it was a spare engine prepared for his mk2 escort racing car. The balance shafts in his opinion slow the response of the...
  4. Help, Advice, Saabs and Motoring
    It's time to replace both drive shafts complete with CV's and boots. Located in Vic Aust, a supply contact has asked, what is the spleen count for the CV's? The vehicle is a 1993 CS 2.3L non turbo. Any help with parts reference site or details please.
  5. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Some people had disconnected balancing shafts in their 2.0T engines by removing the chain, instead of using a replacement kit (new chain and controlles). Does this affect the engine performance and service life? Thanks, AG
  6. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi, I have a SAAB 93 2003 Linear and I have just replaced my sidelight bulbs with led bulbs. The problem is that they intermittantly flash and approx one and a half minutes whether the car is on or off, if the alarm is activated or not and if the side lights are switched on or off. Has anybody...
  7. Saab 9000 (1984 - 1998)
    Because of pressure of work and an MOT due, I am looking for a quick fix on the CV joints on my '96 9000 CSE 2.0LPT. In a corner of my garage I have the two complete drive shafts from a 93' 9000 CSE 2.3FPT - I know they are good because I dismantled the car they came off. The question is...
  8. Saabscene: Performance
    hi to all whats all this removeing the balance shafts? whats the gain or loss. i thought that thay kept it all anti vibe down ther
  9. Help, Advice, Saabs and Motoring
    Hello All, Just reading the What car 2004 June edition and their is an article about the new slk and the great "new" engines fitted with internal balancer shafts, oops how many years have saabs had this fitted ? The JD Power survey was also done, here are the results: Saab 9-5 19th Saab...
  10. Saab 9000 (1984 - 1998)
    I have just been told from my garage that my car is not going to full boost because of balance shaft bearing sprocket/chain wear and/or incorrect refitting. This causes noise picked up by the knock sensor.Note that there is no chain noise coming from the engine. I haven't picked up the car yet,I...
  11. Saab 9000 (1984 - 1998)
    I have just been told from my garage that my car is not going to full boost because of balance shaft bearing sprocket/chain wear and/or incorrect refitting. This causes noise picked up by the knock sensor.Note that there is no chain noise coming from the engine. I haven't picked up the car yet,I...
  12. Saab 9000 (1984 - 1998)
    What happens if ballance shaft sprockets are not set up properly, i.e. timing marks not quite right when chain fitted ? I have uneven idle problem,have fitted new sprockets and chains and do not want to strip down again if not the problem, any advice will be appreciated by a complete novice.
  13. Saab 9000 (1984 - 1998)
    What happens if ballance shaft sprockets are not set up properly, i.e. timing marks not quite right when chain fitted ? I have uneven idle problem,have fitted new sprockets and chains and do not want to strip down again if not the problem, any advice will be appreciated by a complete novice.
1-13 of 13 Results
Top