Saabscene Saab Forum - Saab Technical Information Resource banner
servo
1-13 of 14 Results
  1. New Member Introductions.
    I have started to replace the brake booster on my saab 9-5 . so far I have got as far as removing the 2 top bolts but i cannot get to the third bolt at the bottom of the booster. I have tried going at it from the top and underneath with a spanner and a socket but just cant get anything on the...
  2. Classic Saab 9-5 (1997 - 2009)
    Hi guys, I believe I have a leaking rear seal on my 52 plated 9-5 vector 2.2 tid. I have to stand on the brakes to stop it and I also get an intermittent warning light and loss of power - making me think I have a vacuum leak somewhere and tieing in with my duff brakes. Have tested vacuum pump...
  3. Saab 9000 (1984 - 1998)
    Neither of the headlamp servo adjusters work on my newly acquired '95 9000 Aero. It seems it must be electrical and a bit suss that both don't work - fault could be upstream of the servos. I have one out and in bits and its not got anything obviously wrong with it internally. The cable to it...
  4. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Has anybody got any instructions please?
  5. Saab Parts / Accessories, FOR SALE and WANTED
    I need a brake servo for a 2001 y plate 9 3 2.2 TID fairly urgently if anyone has one. Second hand ok as long as it works obviously thanks
  6. Classic Saab 9-5 (1997 - 2009)
    hi all I took the car(9-5 aero '02) to the garage, they stripped out the faulty servo and then told me the servo i supplied wouldnt fit. Ipaid for an '04 servo from a breakers on ebay, but the fools sent me an '01 servo, which wont fit my '02. Of course i still had to pay the full labour...
  7. Saab 9000 (1984 - 1998)
    Flippin' Heck! Just got me alternator sorted out and now another problem. Took the car ('97 CSE, Auto, 2.3 LPT, 160k) out today with wife and kids and discovered there is a complete loss of servo assistance to brakes. I can still stop the car but it takes huge force on the pedal to do so. The...
  8. Classic Saab 9-5 (1997 - 2009)
    Can anyone tell me the part# for the brake servo. Car is a 1999 MY 2000 Auto. I've just replaced the vacuum pump but the servo has engine oil in it & brakes are playing up. Thanks
  9. Saabscene: Performance
    I originally posted this query on UKSaabs, but got no response because (a) the site went awol (b) its a stupid question (c ) obviously too difficult. :smirk: ---------------------------------------------------------------------- Aeroadster wrote: On YLee's subject of underservoed brakes...
  10. Saab 9000 (1984 - 1998)
    My local garage confirmed I have no servo assistance on my brakes. The car is not a pleasure to drive in this form. Having spoken to WMSS, they suggested testing the one-way valve that sits in the pipe between manifold and servo. The valve in this pipe sits exactly where my vacuum pipes were...
  11. Saab 9000 (1984 - 1998)
    My car currently has very little stopping power. Running EBC Redstuff pads on Brembo disks On the recent trackday I started to lose braking power and had to slow my pace. I thought this was brake fade - the pedal didn't go to the floor though, I just couldn't push hard enough to lock the...
  12. Classic Saab 900 (1979 - 1993)
    Failed the MOT this week. Seems the brake pedal looses pressure slightly when held down. I tend to use the handbrake when stopped and there is no discernable loss of braking power and no loss of fluid. Hence I haven't noticed until this was pointed out. Car is a 1988 T16 and the local Saab...
  13. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hi All Took my car in yesterday as there was a loud hissing noise which would stop and start everytime I'd press the brake pedal. Dealer diagnosed the brake servo. In terms of the leak of air pressure from servo would this impact by boost pressure as I notice there is vac. hose that goes from...
1-13 of 14 Results
Top