Saabscene Saab Forum - Saab Technical Information Resource banner
screw
1-20 of 22 Results
  1. Saab 9-3 Sedan/Conv/Combi/TurboX/AWD (2003+)
    does anyone know what size torx head ill need to get the front door panels off? I cant get them with an allen wrench
  2. Chat
    Other half returned to her car on a cold December evening to find a council issued parking ticket on the car stating it was parking in the wrong bay - the bay was for 'Car Share' vehicles displaying the correct 'Car Share badge', etc. There are two signs for this bay, one at either end and...
  3. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    On the sides of what should be a transmission tunnel ..... But isn't Yeah them ...... Anyone any idea what they are actually called ? ....... Mine are grey ........ Groan I'm going to have to use money & buy two ain't I ? ........ Moan moan grumble grumble ......... Part # Anyone ?
  4. Part number requests
    Hi Guys Gals, Was hoping some one could help me. I replaced the radiator in my saab 9-3 2006 estate today. All went well except for one of the screws that attaches the fan to the radiator stripped and had to be ground off in the end due to rust. So at the moment the fan is screwed back on with...
  5. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Can anyone tell me what the metal pipe is called which includes the coolant bleed screw? I want to replace this as it's extremely rusty, it looks as though someone has bled coolant all over it and then left it to rust. I drive a 56 plate 9-3 TID 8v. Thanks.
  6. Classic Saab 9-5 (1997 - 2009)
    Does anybody know where I can find a Saab door handle screw cover, part 4420600? Thanks!
  7. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hello all, I have a 2002 9-3 5 door. I have lost the bolt-screw-fastener that keeps the plastic panel over the accelerator up and away from your foot. It appears to be only one hole there, and whatever was there is missing causing the plastic panel to hang down and in the way. Can someone...
  8. Classic Saab 9-5 (1997 - 2009)
    While playing around under the bonnet (trying to look knowledgable!) I took off the upper engine cover (the one which is at the dipstick). I noticed in the middle of the fuel rail was a handscrew with a slotted screwdriver line. I turned it 1/4 clockwise till it was closed fully, and noticed...
  9. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    are the back breaks the same as the 900 with the screw in caliper piston which needs a saab tool , also if the cat heats up the sump so much why is there no heat shield there should i make one ,sorry for asking dumb questions iv got to get my self a haynes manual but when iv bought them in the...
  10. Saab News
    Screw you, Alex Taylor III. While we're here, screw you Alex Taylor II and Alex Taylor I as well!! And what's with the "III" business, anyway. Don't you know that apart from The Godfather II, Rocky II and The Empire Stikes Back there's never been a sequel as good as the original...
  11. Classic Saab 900 (1979 - 1993)
    Went to replace the rear pads on my 1989 8V 900 and found that the nearside adjusting screw seems to be missing meaning I cant adjust the new pads !!! Does anybody know what thread they are? Or where I can buy one seperately? Or failing all that where is the best place to get either a new...
  12. Classic Saab 900 (1979 - 1993)
    Hi Guys I'm looking for help getting a screw out of my decor panel. Prolems are.. The torx whole is to shallow due to corrosion. I managed to get the left one off using a pair of pliers. The right one seems to just spin around (i suspect that the thread at the top of the screen has...
  13. Classic Saab 9-5 (1997 - 2009)
    Or more to the point 4 screws missing. The DI cartridge on the top is missing the 4 screws that hold it on, anyone have any kicking around or know where (apart from SAAB) I can get them from? I good point about this is it looks like the DI may have been replaced and the lazy ar*e mechanic lost...
  14. Saab 9000 (1984 - 1998)
    Does anyone have a spare screw that holds the DI cartridge in place? I've just cleaned my engine bay and noticed that one has gone on holiday. Just wondering in anyone has a car they're using for bits with a spare screw out back that they felt like popping in the post?!
  15. Saab 9000 (1984 - 1998)
    Does anyone have a spare screw that holds the DI cartridge in place? I've just cleaned my engine bay and noticed that one has gone on holiday. Just wondering in anyone has a car they're using for bits with a spare screw out back that they felt like popping in the post?!
  16. Classic Saab 9-5 (1997 - 2009)
    When we bought our 9-5 estate s/h, the small plug-like cover over the screw fixing inside the internal drivers door handle (hope you're following this!) was missing. I've looked on the net, but I'm either not using the right keywords, or it's not there. Can anyone tell me what the correct part...
  17. Saab 9000 (1984 - 1998)
    Hi all I have a problem (my friends would chuckle knowingly at this point, but no, not that problem ). I have come to replace the dics and pads for the first time on my aero, only to find that some git has sheered the teeth off the torx screw (a likely story) that secures the disc to the...
  18. Saab 9000 (1984 - 1998)
    Hi all I have a problem (my friends would chuckle knowingly at this point, but no, not that problem ). I have come to replace the dics and pads for the first time on my aero, only to find that some git has sheered the teeth off the torx screw (a likely story) that secures the disc to the...
  19. Saab 9000 (1984 - 1998)
    On of the screws holding down the dash beneath the driver side speaker grill won't come out. It'll spin endlessly, but it won't come out. About every full turn there is an increase in resistance and then it goes away and comes back with the next full turn. Any ideas on how to get the screw...
  20. Saab 9000 (1984 - 1998)
    On of the screws holding down the dash beneath the driver side speaker grill won't come out. It'll spin endlessly, but it won't come out. About every full turn there is an increase in resistance and then it goes away and comes back with the next full turn. Any ideas on how to get the screw...
1-20 of 22 Results
Top