Search Results for ‘obd’

I got a ABS warning spear on my 2006 9-3 sports estate, I've seen this before when I changed the front wheel bearings last year and forgot to do up the ABS connector, I had a quick look and they all seems ok, so I presume it's a break in a wire somewhere under the car or the rear wheels...

Does anyone own a bluetooth obd2 scanner that works? I was about to order this one http://www.ebay.com/itm/Advanced-ELM327-v2-1-Bluetooth-Interface-OBD2-Car-Scanner-Adapter-TORQUE-ANDROID-/310667634232?hash=item48553be638&item=310667634232&vxp=mtr but I thought I would check to see if anyone has...

Hi, This is what comes up after connecting to OBD software. As my car is b204 and doesn't have Mass Airflow, I'm a bit confused and would like to aks You Saab people to take a look at this and tell me what's going on here and where to start... I presume there's a sensor that is supposed to be...

x

Hi everybody! When I started work on my latest Saab, Reticence 1, I did not quite realize how little SPECIFIC documentation there was on Saab's OBD 1 to OBDII transition years-1994 and 1995. I do know this…flash codes suck, and to me, they are not acceptable considering there is a 16 pin data...

Hi I am getting 2 fault codes - P1260 - Throttle return spring too low force and P0101 Mass or volume air flow circuit range - performance problem. The first makes sense but I haven't been out to look at the spring as it's peeing down out there!! The second doesn't mean anything to me but I...

Hello all, Finally got around to buying and OBD 2 reader for this damn re-occuring flictuating revs prob. Chsanged all plugs, D I Pack, front gen Lambda, cleraned maf,all hoses NOW ok, and yet the warn9ing light keeps coming on and the obd is displaying P0101. as you can see from pic it's not...

Hiya, I have a 09 ttid aero - i want to force a manual regeneration of the DPF, which software do i need and where do i get it?

Hi, would anybody be able to tell me what type of connector this is and what reader I need? Many Thanks Mark

This is posted on another forum. Hi I am not sure if this is the right place to post this. But here it goes. I am looking at getting a tech 2 clone. I have done a lot of research about this and getting mixed views about them. It seems to be all about what site and supplier you get them from...

Any recommends....1.9 TDI 05... Numerous ones for sale on Ebay........anyone tried one.....? TVM

http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P1131/Diagnostics/Saab/Default.aspx

Hi All I've got a 2006 95 Vector 1.9TiD. I've had a couple of instances of the engine warning light coming on (DPF on both occasions) which necessitated a trip to the dealer to find out what was wrong. So I'm looking to get an ELM 327 to read the codes, then seem cheap enough on ebay at <£20...

Hi, Has anybody had any luck flashing their ECU through the OBD connector using T7tool and ELM327 interface ? It was being developed but not sure whether the testing was ever completed. I have managed to read the binary from the ECU successfully, but I don't want to try flashing a tuned version...

Hi, Is there any way to find out if the OBD values are outside the normal acceptable range? Also, is there any way (or place) to compare logged live data to other similar Saabs? Best Regards Thomas "A pedestrian is someone who thought there were a couple of gallons left in the tank."

Hi, Got a mate with a 2004 93 which is flashing its EML. Ran a diagnostic and it's showing codes P2128 (Throttle/Pedal Position Sensor/Switch E Circuit High Input) & P2138 (Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation). 1) Is the car still safe to drive in this state? Will the...

Hi all, My 9-5 2.3T SE (1999) refuses to start all of a sudden. I have tried the following to troubleshoot: - Checked for current on the DI cassette and the fuel pump. - Pressed the valve on the fuel rail to see if fuel came out when ignition was on. - Removed the tube on the fuel...

Following the other threads here I finally bought an OBDII reader, and it's already worth its weight in gold. My 02 has just developed an occasional misfire. Just very occasionally and no CEL's showing. i plugged the reader in and went for a drive. I then read the trouble codes which showed a...

Is it the OBD 2 that saab use i was looking at getting a diagnostic kit has anyone got any recomendations thanks

What a weird title!! Had the 93 Turbo Vert (2.0l 175bhp) serviced this week including having my plugs changed. Got it back on Tuesday and have a couple of issues I need a hand with please: 1. My CEL came on. Can somebody point me towards the OBDII port, I have a reader so wanna check the...