Saabscene Saab Forum - Saab Technical Information Resource banner
mounts
1-19 of 96 Results
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Does anybody know what the floor mounts on the bottom of the driver and passenger seats are for?
  2. Classic Saab 9-5 (1997 - 2009)
    Can any one advise as to how many engine mounts there are and as to the location of them.Have just changed the one that connects to the gearbox and front of body but I am still have a lot of movement when I turn the engine off,so I suspect I have another mount failed but can't pin point where...
  3. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I work on most of my friends cars. On of them has a 99 9-3. When I first worked on it the car made a sound when going over any bump. Ends up the passenger side strut was busted, no resistance so I replaced both struts (they look like cartridges) a week later she came back and it was making...
  4. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    My 05 TID 150 appears to have a warn/broken engine mount, indicated by a louder than normal rattle at start up and when engaging throttle. Question is, how do I test the mounts, so I only replace the knackered one(s)? Are they expensive to buy or tricky to fit? Cheers!
  5. Classic Saab 9-5 (1997 - 2009)
    I've noticed reference in the other place (TSN) to common problems with 9-5 engine mounts needing to be replaced every so often. Now, I'm new to the 9-5 (in my case, a 2002 ARC Estate, 2.3T, 162000 miles) but I can say that I was surprised by the amount of harshness and vibration coming through...
  6. Saab Parts / Accessories, FOR SALE and WANTED
    A pair of top mounts for 9000 - fit all models. Bought new but used for only 13k miles - car now sold and these have been sitting in the shed. Excellent condition. P&P probably £6-ish to UK mainland or you can collect from SR6. Available new from PFS for about £23 each. How about a fiver each...
  7. Saab 9000 (1984 - 1998)
    I have been looking on the internet and have found someone selling two different types of mounts with the first supposedly being compatible for all 9000's 84-98, whereas the second is for all 9000's from 89-98. This doesn't seem right - so just to confirm, which mount is needed? I am thinking...
  8. Saab 9-3 Sedan/Conv/Combi/TurboX/AWD (2003+)
    Hi guys for the ppl that have done the audio upgrades how did you mount the front door speakers ? I bought some mounts from skankfords but they don't fit. Admittedly they were for a vectra. They will go with modding but wanting it to be right if I can Thanks !
  9. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Evening all, I am hoping someone can point me in the right direction please..... I have a '98 2.0 non turbo manual, and there has always been a bit of movement in the gearstick when on/off the power. There seems to be a bit more noise now, particularly from cold (i think!) and i am suspicious...
  10. Saab 9000 (1984 - 1998)
    Ok so on my 95 9000 i have bad clunking from the front end on the drive side. I replaced the upper engine mounts cuz they were very bad. Replaced with poly. Checked the front end Ball joint is ok and trans mount looked good. and tie rods were good. But when checking the wheel for "play" by 9...
  11. Classic Saab 9-5 (1997 - 2009)
    Poking around under the car at the weekend, trying to find the source of an annoying vibration at 1000rpm, I noticed that both the lower fixings on the air filter housing had failed. These have a bit of rubber bonded between a metal insert in the housing and a threaded portion that is fixed to...
  12. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi I had the front suspension springs replaced last year on my 2004 9-3 TiD as one of them decided to crack when I parked outside my house! It was done at Saab main dealer so I presume they fitted springs which hopefully won't suffer the same fate. Just over a year on (and a month out of...
  13. Classic Saab 9-5 (1997 - 2009)
    Getting vibration through the steering wheel, so I assume that the engine mounts are shot so I've ordered: A new torque rod: http://www.an online retailer.com/product_info....roducts_id=3080 And a new engine mount: http://www.an online retailer.com/product_info....roducts_id=3906 Now they...
  14. Saab Parts / Accessories, FOR SALE and WANTED
    One of each, ready fitted into freshly blasted and cleaned brackets. The block one is missing a bit of the mounting ear but it was like that when it came off my 9k and I never had any problems £25 each plus £5 postage
  15. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi...I have just replaced the front coil spring...but now realise the strut tops and drop links could do with a change. Is it still safe to drive locally for a couple of days till the garage get the parts :eek: ???
  16. Saab 9000 (1984 - 1998)
    Hello, Does the hyd. mounts wear even if they dont leak ? should I replace when R & R the engine ? Thanks KB
  17. Classic Saab 900 (1979 - 1993)
    Hi All, I have decided to remove my engine myself to undergo some oil leak repairs. After looking at the Bentleys, I noticed that the L/H passenger side engine mount seems real hard to get to to undo the Bolts. It seems to be hiding under the ABS sys and the two nuts on the underside of the...
  18. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Just noticed whilst valeting my 04 9-3 2.2 TiD Arc that the black triangular bits of trim at the base of the wing mirrors have faded, and started bubbling and peeling off, which is beginning to look like a dogs breakfast, how much would a dealer charge for replacing these relatively...
  19. Saab 9000 (1984 - 1998)
    My '93 L 9000 LPT feels a bit lurchy as you let off the throttle and pickup drive again, makes low speed traffic driving a pain. I replaced the engine top mounts about ten months ago, when i changed them i positioned the voids in the rubber at 90 degrees to the way they came out, i wanted to...
1-19 of 96 Results
Top