Search Results for ‘mbc’

http://www.smartperformance.net/installation/T7SMBCinstall.pdf All ya need to know !!!:crazy:

Morning, Ive fitted a Dawes valve to nearly all my cars; Ive got one turning up in this mornings post all being well; I'm using to increase boost fractionally, hold boost better & to spool a little quicker but cant find a how to ?? Ive already disconnected the electronic boost thingy and she's...

Hello everyone, Will manual boost controller work with B204E engine? If yes where to fit it? I couldn't find APC. While I'm here what would be the easiest way to raise the boost pressure on my engine and will I need boost gauge? Do apologise if you will find my questions silly.

is it possible? i would be fitting a boost gauge aswell.

Hello all! My name is Tristan, I'm from Belgium. I have a 1991 9000 2l turbo S-line (close to Carlsson version). It has the LH2.4.2 injection system and 140kW. This car comes from Italy. Here's a picture: I have recently bought and installed an abbott MBC. Firstly, I mounted it with C and...

i understand the mbc can adjust the spoolup time. ive heard they are great and im thinking of getting one for my 97' 900se. Im wondering what the anticipator kit does..?

Hi all. Can anyone please tell me the correct way to install an Abbott racing MBC? Iv got one sitting here I removed off my old car and cannot remember what pipes go where. An am I also right in thinking I have to leave the old apc one plugged in? Thanks for your help

Hy guys! I decided that I like to buy a MBC (Manual control boost) to my 2.0 LPT(150 HP) car.Am I right?: Fuel Cut off at 10 PSI(0,69 bar) in the LPT models? (The normal boost is 7 PSI-0,48 bar)So with the MBC I can increase 150 HP to 180 HP?It will be enough for me.THANKS!Now I see that...

Hi all, I started work on the track car on sunday, fitted a new rocker cover gasket and cleaned up the engine bay (it was covered in oily muck due to the rotten gasket). As this is a track car and will never be on the road again, I want to set to work on getting as much power from the B202 FPT...

Hello peeps i have recently had a speedparts stage 1 ecu fitted and i am impressed with the performance compared to stock i have a mbc valve that i had fitted before but i removed it after a few days and opted for ecu upgrade ,but i am now thinking of refitting my mbc as i have heard it...

hi people, i have a 96 ng900 turbo and i am looking to start tuning it, i want to buy a mbc valve with anticipator (mbc+a) i am living in the south east does anyone know who supplies these in the uk? thanks

Installed and set up my MBC valve today... Set the boost to about 1 bar peak so not to run to high not having APC to protect (couldn't do anymore than that if I wanted to anyway as I dropped my boost guage out the door and broke it!! ) The one thing that you really notice is 1st gear. Boost...

after a few hard runs to correct the ECU map for the loss of the MBC my car actually feels far better for it with my customized ECU. I used to have a rough edge in the low rev range, which has now gone. Mind you, the new DIC and new spark plugs might have also helped matters. I also replaced my...

When I bought my '91 spec 2.3CD Carlsson it had a MBC fitted, although the APC was still connected. It never gets past halfway up the boost gauge. Read a thread somewhere that someone had a similar car and had found that pipes to APC control were wrongly connected. What are the correct...

Hi guys, I just picked up my '89 900 T16 yesterday and I realy like it. One thing I have noticed is the lack of quick spool up and lack of boost period. The stock turbo gauge will peak 3/4 in the yellow and never reaches anywhere near the red. I also don't feel the cick back once the turbo...

I was just wondering, my AR ECU is running at 1.5 bar, if i was to buy an MBC and set this at 1.3 bar, would the MBC override my ECU?

I've just got an MBC (ball and spring) to go on my CSE 2.3T. Trouble is, I've never used an MBC before so I'm a bit clueless. Is there a good idiot-proof procedure? My guess is that I need to set it up so that I can't hit the fuel cut-out no matter what I do. Is there a direct correlation...

Hi all, Just after a few questions to be answered. I've got a Manual Boost Controller to fit to my 1997 9k 2.3T. This is the one I have: Click Here A) Dose it need to be fitted in series? B) Will it work ok with my standard ECU? All comments and help are much appreciated!

Hi all, Just after a few questions to be answered. I've got a Manual Boost Controller to fit to my 1997 9k 2.3T. This is the one I have: Click Here A) Dose it need to be fitted in series? B) Will it work ok with my standard ECU? All comments and help are much appreciated!