I have a 2001 93 and I want to install an aftermarket head unit, but I want use the existing Saab amp to drive the front door speakers.
As I understand the amp gets its signal via a connection from the factory radio.
The new headunit has a plug to connect an amp, can I connect that to the...
HELP! I cannot find anywhere to ask a question, but this thread might be able to direct me. My SAAB radio died and I replaced it with a Pioneer unit, installed by a specialist. All of the audio warning sounds do not now work. Is there any fix to this?
I need some advice for my sound system.
I'm a new joiner to the saabscene, need some help with my 2003 Saab 9-3 1.8t vector.
The system that I believe to have(did some research) is: ICM1, no CD slot for some reason,
and the 4D premium 150 sound system.
I noticed that my front...
Any advice on the following gratefully received. I've recently bought a 2009 Saab 9-3 Cabriolet Aero 1.9 TTID. Love the car but happy to upgrade using proper SAAB/SAAB approved bits. I was looking through the Torque magazine and they have an audio upgrade - Kenwood DNX4150DAB (p3 -...
My car is a 2009 9-3 SS Turbo Edition with the standard stereo and amp in the boot. I've purchased a Pioneer AppRadio 3 (SPH-DA110). I purchased this fitting kit:
So I bought myself a cheap ****** rip-off defi boost gauge which actually cost me nothing in the end which was a result
the problem im having is that the installation instructions are not very clear and the coloured wires seem to be different than the instructions.
can anyone help...
Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
I have installed a boost and volt gauge see what my ride is doing=D!
I have all wires done and it lights up and works fine!
But i have one question! where do i attach the vacum hose from my boost gauge so it can get the right readings?
Any picture or anything that can help me is...
Hi all, new to the forum and looking for a little advice please.
I am trying to install an aftermarket HID kit to my 2008 9-3 saloon.
Got the HID kit already and have connected them up, tested and working fine with no errors reported by the car diagnostics as I bought the error free can bus...
Hello ! I am replacing all the speakers in my car and adding a subwoofer in the trunk. Since there´s alot of guides but they are either :
a) not complete
b) not clear
c) not updated
I thought i´d make a complete guide on how to replace the speakers.
Since i´m not home right now I can´t take...
Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
I am about to fit an aftermarket kenwood cd player into my 2001 93 but I want to keep the steering wheel controls.
I can buy a unit to connect the new cd player to the car, do I connect this unit to the existing cd wiring or the sid input wiring as the steering wheel controls connect to the...
Recently I started a thread about Aux in which drifted into the realms of DAB units. My conclusion was the best option for Aux in on my 2004 9-3 convertible is an add on DAB unit with aux in as I have in my other car. It feeds down the FM aerial and puts data up using RDS. So I bought everything...
After havimg some trouble installing new amp on another thread, decided to do a brand new AV install decided to install Pioneer AVIC-F950BT Double Din unit. Can someone please tell me if these parts are all are required for install.
Part # for the facia kit is CT24SA08
Part # for the...
I want to connect up my MP3 player to play through my car speakers. I have a 2000 95 2.0T with standard radio/CD player. I was planning to hardwire an FM modulator (having tried the wireless ones which are crap), but it looks like a bit of a PITA for someone who's crap with wiring.
New on the forum I have saab 9-3 1.9 tdi 2007 reg . I have searched through some threads and can't really work out what is required to install a second amp to power additional 6x9 parcel shelf speakers. What I need to know hiw to wire the amp, do I need to wire the amp into the factory...
So "how to" install an amp in your boot and connect to 6x9 speakers. Firstly in my 9-3 the 6x9 speakers frames are empty in the boot so it's an easy clean option if you want better sound, you can opt for a sub obviously.
So after much searching and not finding a lot of info on the net here's...
OK guys, finally decided to bite the bullet and install my amp today, I bought a Vibe 4 channel amp last year and bottled fitting it, I also fitted vibe 6x9's running off the rear speaker cables but they were crap.
So I installed everything and ran the live feed outside of the car as a test...