Search Results for ‘hub’

Seem to be on here a lot lately. This is just my findings which may help someone in the future. My wife normally uses the Saab, so when I got in it last week it was a while since I drove it, noticed a noise which increased with speed. Thought it was probably tyre noise due to low inflation, so...

my car has a loud rubbing (hum,metal grinding noise) coming from the front passenger front wheel. I noticed that when you hold the wheel top and bottom there is a good bit of movement. also when you hold the hub top and bottom there is a bit of play. I took my car to a tyre place today to remove...

I have just fitted a set of hub caps on my 1986 900i and on the last found two of the retaining blocks missing. These are the later type and so far I have not been able to find some, or a supplier of the part. Does anyone know where I can obtain them?

I am puzzled! :confused: What is the size (metric) for the HUB NUTS in front? My car is a SAAB 93 I, 2.0i, 1999. YS3D Engine type B204i. The car is original and has no sporty changes. Who knows? Thanks Bill

I damaged the wiring that runs from the hub to the loom plug on the passenger side of my 05 Saab 93 Tid 150 with ABS and Traction Control. I know it can't be removed, but I plan to solder the wire from the hub to the new one to make good. PM prices including postage. Thanks!

Hi All, Ok on Friday I went and had 4 new tires fitted and as seems to always be the case the garage find something else that needs doing at the same time, on this occasion it was my NSF wheel bearing having Excessive play (although I personally would say very minor). Anyway I was in Euro...

Hello there i need to remove my rear hub so i can have the caliper cradle assemble helly coiled as when i changed my rear pads i found that one of the two bolts holding the calliper unit on had been cross threaded ! So i need to remove the hub are then any special tools i need and will i need a...

does any one now what is a good make for a wheel hub(front) and how much would you pay for one:confused:

just a quick question is a 2007 9-3 wheel hub pressed in?

Saabscene, Yesterday I decided to jack the front of the car up to investigate what's causing the vibration under braking and metallic scuffing noise coming from the front N/S wheel when I put anything over a 1/2 steering wheel turn to the left. I got the front wheels up and tried to reproduce...

Hello, I need a front hub for my 06 aero convertible, I've been told I can order one thats maketed for a Vectra C but I'm puzzled by the IDS referance, what is it/do I have it/ will it cause me a problem? Advert states Thanks Col

Saab P/N: 93186387 Front wheel bearing hub assembly complete with speed sensor. Brand new OEM part. I am 99% sure this suits all 9-3 models MY03 onwards but please check before buying. £75 including delivery.

Hi Have just stripped the thread in my hub where the bolts securing the caliper carrier go through. Whats the best course of action? 1. replace the whole hub - costly and a right pain or............ 2. fix it with a helicoil kit? If I do fix it with a helicoil kit, does anyone know what size...

Hi all, I'm going to rebuild my front suspension shortly and was under the impression that I would need a new top mount nut for the front damper assembly and front driveshaft/hub nut for re-assembly. Imagine my suprise when Orpington Saab told me they've never replaced them on a car before...

Hi All 1st time post hope someone can help, I need to replace the o/s/f hub on my 2004 1.9 tid sport. I hear from a mechanic friend that the part is the same as one for a 2002 vectra c ? as i can get this part a lot cheaper, can someone confirm that this will fit my car and dare i ask...

Has anyone had experience of buying a rear hub asembly from ziggy-a2z off eBay? Price is amazing (£44.99 + £10 postage) but how is fit/quality etc.?

My cv joints are worn on the right side of my 92 9000. I am going to replace the drive shaft. My Haynes manual says the hub bearing should be replaced along with the shaft as a matched set. I do not see why the bearing should have to be replaced as I don't think it is bad and it is expensive...

Oh dear. I was taking the discs off and the wheel locater spigot on the drivers side proved very stubborn. 6 sided impact wouldn't budge it. Cut off spigot then drilled through,then like a fool, i used a stud extractor eezi-out thinking to save the thread. Well the extractor broke so now in deep...

Doesn't look like there is much room to get a puller on?

used but in great shape -- perfect for your winter tires -- factory SAAB steel rims with hub caps (15x5 1/2 J, ET-39 4-bolt) located in Markham, Ontario $120 call 416 273 2135 and leave a voice mail if interested