Search Results for ‘housing’

I've just bought a 2006 saab 9-3 Aero convertible with the 2.8T I'm looking for a place that I can discuss my problems and trouble shooting with the car located in Canada First problem is the oil filter housing will not come off brought it in to an oil place after me being unable to remove it...

I know this is a bit of a long shot... Doing a custom install on a Regal GS, for which I have a BPS short shifter for a 9-3...except the pivot ball is slightly too small. Everything else is okay. My Buick uses the same F40 transmission. I seen BPS makes a shifter for the Cobalt SS... But I...

Hey guys, I am hoping you can tell me if I can replace the thermostat without replacing the entire thermostat housing??? I will replace the coolant temperature sensor (the one with a blue plug thats next to the thermostat housing but is actually mounted to the engine block) but thinking of...

Hi All :D, New to the forum and just picked up my 2005 9-3 1.9 Tid 120bhp. I noticed that the temp gauge is only getting to a quarter (max) and down again when I turn the heating up inside the car. I presume that that Stat needs changing and was wondering if there is a comprehensive How To...

So spoke with ECP who gave me the choice of a new thermostat and housing for £30ish notes or just the stat itself for £8, given my last motors haven't been that difficult to swap just the stat, I bought the stat alone. However, I can see the stat, I just can't figure out how to disengage both...

Does anyone know the purpose of part #12789738 (small black part/cover that bolts to the thermostat housing itself). Is this just a drain for the thermostat housing? Also, I was wondering what the purpose of the small pointed tip on the inside of the black cover? It was leaking on my 2011 so...

I somehow shattered my fog light on a recent trip. Does anyone have a driver's side housing they're looking to sell?

Hi i had recently done the clutch on my 1999 saab 93, and was bleeding it, until i over tightened the bleed screw, i used abit to much force in attempting to untighten/loosen it, the bleed screw with its plastic housing came off, detaching itself from the bell housing with a hissing...

The rules are here to help the buyers and sellers so please adhere to them. This is the information that MUST be provided otherwise the advert will be removed and a private message sent to the seller/user. The user/seller is then allowed to re advertise as long as they then comply with all...

Hi, As per the title, I'm looking for a TD04HL Exhaust (hot side) housing please? I've got a Volvo turbo which I'm looking to convert and I'm on a tight budget so if you have a spare that's in reasonable condition I'd be grateful if you could make contact please? I'd consider maybe buying a...

Hello, any body help on correct tool to remove and refit the oil filter on TTID 180 car? it doesnt have a wrench socket like the 150bhp but really want to fasten it to correct torque setting when refitting thank you

Bought new one from e-bay, housing only,pretty good quality for only £6. The problem is that the buttons are a hard plastic, whereas the old we're rubber and a lot easier to press. As my wife has arthritis and will be using the car I am looking to get another housing for the other fob, does...

Hi folks, I bought my 2008 TTiD a month or so ago and although it says about 40% left until the next service, I thought it'd be good to change the oil & filter anyway before an upcoming 1,000-mile round trip (plus then I can be sure it's got the right oil!) Unfortunately - as is not uncommon...

Has anybody got a scrap Mitsubushi turbo that I can buy for reasonably money. I only need the exhaust housing as my wastegate poppet valves fallen off. Or, I can swop for parts if preferred. I'm at Notts. Thanks. Mike.

I have ordered a new thermostat and housing as my car is barely warming up at all, warms up slightly ore at high speed but cools down again after that. So I can only conclude that the thermostat is stuck open. I am a fairly confident and competent DIYer... Does anyone have any thoughts or...

Hi Someone clipped our 2006 93 when my partner was driving and caused the LHS mirror (just the glassy/mirror bit, not the whole housing) to pop out. Haven't yet found a way to re-attach it properly. So for now we're having to fold it in and leave it there. Is there an easy way to fix...

I noticed this oil leak the other day and tightened the nut. This made it worse. Can anyone advise on stopping this oil leak.

done oil and filter the other day and now i think its weeping from the housin, the thing was the filter didnt come with a large ring for the lid so i presumed didnt have one, i didnt see on either ont he lid when removed it. ive nipped it right up but thi9nk its still running down slightly...

Poking around under the car at the weekend, trying to find the source of an annoying vibration at 1000rpm, I noticed that both the lower fixings on the air filter housing had failed. These have a bit of rubber bonded between a metal insert in the housing and a threaded portion that is fixed to...

iv a mk1 9-3 diesel and it's missing the diesel filter housing which im struggling to source so my question is would 1 off a gm vectra fit ?