Saabscene Saab Forum - Saab Technical Information Resource banner

Discussions Showcase Albums Media Media Comments Tags

1-8 of 8 Results
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I mentioned this one on another post but thought a new thread would be better for future searches: I've had my EGR valve (TiD 150) on and off so many times that now the threads have stripped on 2 out of the 4 mounting bolt holes where it bolts onto the back of the manifold. It's holding with...
  2. Help, Advice, Saabs and Motoring
    Had to laugh this morning as Cardiff council have no money to repair the pot holes in the road but they are busy going around repairing the speed bumps which are worn out or damaged by the cold weather everywhere.Nice to see they have there priorities right. In the meantime i find myself driving...
  3. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Today I removed the drivers side grab handles? that sit in the roof lining above my head. At 6'4" and with the seat lowered I still managed to knock my head on the handle. (Ouch!!!) :mad: I am now left with 2 holes.... Can anyone tell me if it is possible to by a blanking plate / plug...
  4. Saab 9000 (1984 - 1998)
    Took the cover off below the windscreen to check the drains were clear - unfortunately I couldn't see the drain holes, can someone point me in the right direction please ? 9000 2.3 1996
  5. Classic Saab 9-5 (1997 - 2009)
    Passing an idle moment after cleaning the car at weekend and happened to notice that the drainage holes in the doors don't seem to be at the very bottom but a few cm further up.I thought this was odd.Anyone else noted thos possible anomaly?
  6. Saab 9000 (1984 - 1998)
    I've got an annoying rattle I want to track down. I think it's in the centre console somewhere. How do I get the "cubby holes" (or whatever they're called - the containers for stuff below the radio etc) out? Pull hard?
  7. Saab 9000 (1984 - 1998)
    I've got an annoying rattle I want to track down. I think it's in the centre console somewhere. How do I get the "cubby holes" (or whatever they're called - the containers for stuff below the radio etc) out? Pull hard?
  8. Help, Advice, Saabs and Motoring
    It's time to scrape off the [expletive deleted] foam adhesive from the back of my front number plate, and drill a couple of holes in it so that I can mount it onto the bumper (9-5) using a couple of self tappers that the nice parts-man at Lime Garage let me have for absolutely nothing!! Trouble...
1-8 of 8 Results
Top