Saabscene Saab Forum - Saab Technical Information Resource banner
heads
1-18 of 25 Results
  1. Saab 9-3 Sedan/Conv/Combi/TurboX/AWD (2003+)
    Hi guys. Just wondered if anyone has fitted an android to their cars? If so which ones do you recommend?
  2. Chat
    http://www.onemk.co.uk/Recall-Hoverboards-recalled-Tesco-Argos-John/story-28424844-detail/story.html Also have a friend who bought one from COSTCO couple of months back had it stop dead on him and sent him flying, broken leg and hip. battery pack failed. Also fake/counterfeits with no...
  3. Classic Saab 9-5 (1997 - 2009)
    Just did the head gaskets on my 2002 SAAB 9/5 3.0T. Putting the belt back on and placing the cam lock tool in place. The front heads lined up without a fuss but when aligning the rear head the cams do not want to stay in place when I try to line them up and want to flip. Can someone help me with...
  4. Saab 9000 (1984 - 1998)
    hi guys wow site has changed being a while since ive being on well my old saab 9000 areo shes past the 300,000 mark lol still ok and on the same auto box and running 1.5 bar i need some info my aero is a auto i need to do head gasket as me getting blow pass in header tank and i...
  5. Classic Saab 9-5 (1997 - 2009)
    Assuming yesterdays compression diagnostics mean I've got one or more valves on the way out, I'm wondering if it's worth refurbishing my head, or do I buy one already refurb'd and just fit it for ease if theres not a big cost difference? Are all the 9-5 2.0/2.3 heads the same? Will the aero be...
  6. Saab 9000 (1984 - 1998)
    I've been putting up with a slow oil leak from a cracked sump & a leaky exhaust manifold on the old Aero for the last year or so... I did try to drill out a couple of broken studs, but botched it big time and snapped the end of an "easy" out in there! If I was to buy one of the many 9000...
  7. Help, Advice, Saabs and Motoring
    Hi Folks, Technical one, Are the B205, B235 heads the same as the B234 head? Abu-Bakr.
  8. Saab 9000 (1984 - 1998)
    hi all ok ive got a 97 9000 aero 2.3 with close to 250000 on the clock she drives fine no "rattles or smoke" but i must get down to downing the cam chains and bits and i have a spare head that i no it came from a 96 engine 2.3 turbo with 60k its being in my shed the last 4years but i...
  9. Saab 9000 (1984 - 1998)
    Guys, Just 'cause no one else except me was stupid enough to try it I can now reveal that pre balancer shaft heads DO NOT FIT to post '94 blocks. My particular instance is a head from a '93 LPT ( surprisingly with DI ignition ) and a '95 LPT. The difference is at the timing chain end where...
  10. Saab 9000 (1984 - 1998)
    What size of TORX socket do I need for the head bolts? E?? Also what size for the Cam Cover screws? T?? Thanks Dave
  11. Saab 9000 (1984 - 1998)
    What size of TORX socket do I need for the head bolts? E?? Also what size for the Cam Cover screws? T?? Thanks Dave
  12. Help, Advice, Saabs and Motoring
    I have always wondered why there are the half moon cut out's on one end of a cylinder head, the ones that the gasket nearly always leaks oil out of, do they actually serve a purpose, my dad and me used to run Audi 200's and they were very bad for leaking even though you used sealant as well and...
  13. Saab 9000 (1984 - 1998)
    What difference do you tihk it would make fitting a 92 2.0 head to Aero???? The only difference I can see is the cumbustion chamber is smaller, which would increase compression. Any thoughts? Reason is my Aero head is cracked and I have been given the low mileage 2.0 head for spares.
  14. Saab 9000 (1984 - 1998)
    What difference do you tihk it would make fitting a 92 2.0 head to Aero???? The only difference I can see is the cumbustion chamber is smaller, which would increase compression. Any thoughts? Reason is my Aero head is cracked and I have been given the low mileage 2.0 head for spares.
  15. Saab 9000 (1984 - 1998)
    All, (Or those of you interested in the Maptun upgrades for your 9000(s)). I've been looking at the Maptun Stage 3 upgrade for my 9000 Aero & contacted them recently as I know that they are re-working the stainless exhausts. In particular, the back boxes. I wanted to know when these re-worked...
  16. Saab 9000 (1984 - 1998)
    All, (Or those of you interested in the Maptun upgrades for your 9000(s)). I've been looking at the Maptun Stage 3 upgrade for my 9000 Aero & contacted them recently as I know that they are re-working the stainless exhausts. In particular, the back boxes. I wanted to know when these re-worked...
  17. Saabscene: Performance
    Anyone with experience of them? Thinking about one for my aero. Would'nt really bother as I'm happy with the 295bhp but circumstance may dictate a change of head anyway. No real damage, just that the [email protected] AC pump just does'nt want to stay in and the bolt holes been re-thread once already...
  18. Saab 9000 (1984 - 1998)
    Hello! I'm in the process of doing the head gasket on my 91 cd turbo. I removed... ac, ac bracket, top 2 bolts of the torque arm mount, turbo coolant line, intake manifold, and I detached the exhaust at the turbo. Got the head bolts out too. But it's still stuck on there!! We ended up attaching...
1-18 of 25 Results
Top