Search Results for ‘gate’

Hi, I have a 2005 Saab 9-3 Aero convertible. Problem is that there is no gate in the neutral position when going into reverse. This is a mega problem but its a bit of a pain when selecting 5th. I bought the car like this so I don't know the history of how it got like this but I can tell you...

Hello can anyone shed any light Its a 93 tid 2.2 51reg and I,m having trouble with performance car seems under powered and noticed oil coming from the waste gate linkage on the turbo car doesn,t smoke or have any cel light coming has any of you out there had any sort of problem like this ...

I am after a complete classic 900 tailgate, must be complete and rust free

Newbe here Was hopeing what some one out there would be able to tell me where my bosch waste gate is on my 04 93ss as i have searched the forums for info and read numarous posts. But can't find the location of the valve, i am wanting to replace it with the forge splitter r valve the i have...

Hi all, question please. Tail Gate Stop lamp. On here somewhere is a schematic for converting the TGSL, 4 bulb to 6 Bright RED LED's. does anybody know where it is, or have a copy? I know how to wire it, but resistor size is the thing. Mainly the resistor needed to tell the fault box that all...

does anybody know how i can test the wastegate? Does a human paid of lungs have enough umph to make the actuator move?? Cheers [mod comment] Please refrain from posting the same question in more than one forum. Thanks :)

Eyup, Am currently out serving for Her Majesty in a desolate, sandy place and need some help.......... No, not with the unfriendly locals (but thanks for asking!!!)! My Doris has just emailed me saying the boot keeps clicking on my 9-5 Estate 2002, what an absolute 'Darling' she is? Obviously...

.. at least I think that's what's happening. On my 1995 Aero, when accelerating hard(ish) (particularly in gears 3/4/5), it pulls unevenly, and I can hear the familiar hiss of the waste gate opening (or something that sounds like it) regularly every second (or a little less). From scanning...

I am just in the process of ordering a JT 3" system from Elk, and my WGA is stuffed, so I thought I'd take a look at the Forge ones, the problem is the three springs they offer (not to mention the pin size looking at previous posts) 5-10 9-15 and 14-18 psi, none of these seem strong enough as...

Hi, Introduction: black 9000 Aero - 97, bought as a project to keep my hands dirty over the winter, love it, but it ain,t 100% yet I,ve gone from low boost to overboost by replacing the vacuum hoses / rocker breather check valve & dump valve, all of which were leaking first question:I,ve stuck...

Hi All, Not posted for some time, so long that I had to sign up again. I've been advised that I new a Waste gate valve / actuator ? Can anyone advise where/ why & how much ? Thanks guys and it's good to be back! Cheers Gary

Hi, I hope someone can help me with this.... :? The problem: the pin for the reverse gate fell out (I unscrewed it too far) and now I can't get it back in :shock: :lol: ops: here's a picture just to clarify what I mean: thanks arum

I have a 1993 9000 Aero CS. It has been laid up for a couple of months and so the other day I decided to give it a run. It started with no problem and idled quite nicely. After letting it warm up for a while I took it out for a spin. Gentle at first until the temperature had come up to running...

I have a 1993 9000 Aero CS. It has been laid up for a couple of months and so the other day I decided to give it a run. It started with no problem and idled quite nicely. After letting it warm up for a while I took it out for a spin. Gentle at first until the temperature had come up to running...

Hi all I was under the car at the weekend and noticed that the waste gate actuator rod is defying gravity by staying on the actuator arm in the absence of its' circlip (or at least, it is shown as a circlip in the parts catalogue for a 1993 aero). I just wondered if anyone knew the size of this...

Hi all I was under the car at the weekend and noticed that the waste gate actuator rod is defying gravity by staying on the actuator arm in the absence of its' circlip (or at least, it is shown as a circlip in the parts catalogue for a 1993 aero). I just wondered if anyone knew the size of this...

I have noticed that there is a small deposit of soot to the side of the rubber pipe comming from the plastic waste gate. As the car has only covered 17k . Should I be asking for a new pipe, a valve or a cloth?

Stripped the exhaust nuckle of the turbo last night and yes the valve was wedged open but more importantly has come adrift from the lever arm. Has any one seen this before? Also the APC is cutting in at 3500RPM every gear (Light bulb i have in parallel is flickering). I stripped the dizzy and...

Please can anyone help me with the schmatics on adjusting my waste gate on the turbo how high can you set it before the emergency shutoff kicks in? p.s. my 87 9000t has a special "racing saab steering wheel" does this mean it is a special model was there any special models of the 9000 in this...