Saabscene Saab Forum - Saab Technical Information Resource banner
gasket
1-18 of 236 Results
Advanced
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi there I am struggling with the problem of a water leak on the passenger site (both front and back on the right side - it’s European car). I've read hundreds of topics in this forum and yesterday I replaced the gasket washed out by the water in the cabin filter. Now I am waiting scared until...
  2. Saab Parts / Accessories, FOR SALE and WANTED
    Guys, I have available a pair of new, old stock reflectors for a Classic 900. Part nos. 8550865, and 8550857. A head set for the 8 valve engine made by Fell, Arthur and Bennet, complete including some sort of heat shield that I don't recognise and a set of NGK BP6E plugs. All in their...
  3. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Does anyone have any pics of the gasket that fits between the lower turbo and the first part of the exhaust (CAT) Looks like it will be a few inches in diameter. A part number would be very useful if you have one as well. I have been told that it will be the same as a J series Astra CDTi...
  4. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I look like having to change the timing cover gasket in the new year as I have a slight leak from that area. Was advised by Saab mechanic when the car was on the ramp.Maybe I will just see if I can tighten the bolts a touch but being a bit particular thought changing gasket best option. I cant...
  5. Classic Saab 9-5 (1997 - 2009)
    Hi took off the heads, tried to align the camshaft exactly where they came off. Put on the new timing belt and engine won't rotate past 90 degrees just stops. Engine is at top dead center. Took off belt engine rotates normally. I have pictures of the camshafts as they came off and tried to...
  6. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I'm about 99% sure that my 04 Saab 93 Aero 2.0T has a blown head gasket. Pressurizing the coolant system and causing it to blow out the reservoir:mad:. Is this a common problem with 9-3's? And if so, what is usually the cause? And has anyone on here attempted to repair this on their own? Open to...
  7. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    put my car in to get the exhaust manifold gasket done(cabin smoke and a chugging noise, clicking sound when u hit the excelator). guy phones me up saying that the gasket looks good. no sign of blowing. he says that theres damage to the pipe that comes out the left hand side of the egr cooler.he...
  8. Classic Saab 9-5 (1997 - 2009)
    Im replacing my head gasket so looking for a cylinder head gasket kit. as theres alot of aftermarket head gasket can some please advise on not the kit in general but a decent HEAD gasket.. cheers uk
  9. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I have a 2004 9-3 2.0turbo. Just replaced the head gasket and on start up it had a really rough idle. I'm sure the timing went back exactly the way it was. To be on the safe side I ordered a camshaft locking tool for a Z20NET engine as I was told this was the same engine. The tool turned up...
  10. Classic Saab 9-5 (1997 - 2009)
    Hi, I have 2003 saab 9-5 Aero ,I want replace head gasket,I can do it but I don't know how can I take the head off without loosening timing chain.plesae help me
  11. Classic Saab 9-5 (1997 - 2009)
    Hi lads have a 2002 95 2.0t vector and had no issues until last night .on my way home from training noticed the temp sensor on the dash wasn't working so pulled over and restarted the car and she worked until i was pulling into my drive and the sensor went to cold and the mil came on ,plugged in...
  12. Part number requests
    Hi all Does anyone know the part number for the gasket at the egr valve end of the egr to inlet manifold pipe on the ttid? Mine is knackered and has god awful instant gasket on it:mad: Thanks
  13. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi all. I've a 2003 Aero with the dreaded sai pump and check valve problem since buying 2 weeks ago. I'm off to see Karl for a remap and SAI delete when he gets back off holiday. Having a hard time trying to blank off where the check valve would sit. The guys in the VMU at work will fabricate...
  14. Classic Saab 9-5 (1997 - 2009)
    Hello, I need to replace the intake manifold gasket on my 9-5, 1998 auto. Can someone please guide me to do the job. Thanks.
  15. Saab 9000 (1984 - 1998)
    Hello, My 1991 9000 2.3L turbo is spewing white smoke from exhaust, oil filler, and after busting the PVC hose, smoke is coming from the breather, top right (when facing number plate, knees on) of the rocker cover. The smoke used the smell sweet as I had radiator coolant in it but now I am in...
  16. Saab 9000 (1984 - 1998)
    Hi I've posted before about an issue, but I've just done a head re-torque on my 2.3 Carlsson with TCS (which needs resetting). Initial start up prompted a rise in the header tank (is this air? or even a jammed closed stat?) I let it settle down, drained off some coolant, and got it to settle...
  17. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I have a 2003 Saab-93-2.0t.I did replace my water pump which was a meticulos job(not bad after you do this once:-)).The engine overheted before because of the bad waterpump.Now the head gasket is leaking,I found coolant in top of the piston.I do need desperate help if somebody can provide me...
  18. Saab 9000 (1984 - 1998)
    Hi, I just bought a 1997 9000cse with a bad head gasket. There is coolant in the oil. The car has 118,500 miles on it and appears to be well maintained. I have been looking at head gasket threads and noticed the sticky for re-torquing the head bolts. I am thinking of trying that first, but...
1-18 of 236 Results
Top