Search Results for ‘frame’

Hi folks. I picked up my Saab from local garage after having DMF fitted and they commented that neither the front or rear subframes had bushes in them. They were not sure whether the 9-3 Vert was supposed to have bushes or not. Its a 9-3 1.9tid Vector 2006 Vert Can anyone confirm please??

I'm a SAAB newbie, so please bear with me, I need to know the correct way to remove the front A Frame trim to install a new DAB Arial can anyone help

I've had some corrosion on the black window surround on the driver's side for some time. It's just in front of the mirror and looks a common corrosion spot. WHile working on the car today, I used some tape to mask off the area while polishing, and when I took the tape off a big piece of the...

I have just bought a 93 areo and long behold spotted a problem on the dashboard that was hidded behind a handly placed air freshner. Basically i have 2 problems and could do with some help/ Firstly The panel that surrounds the buttons for "Night Panel" and the button to adjust the dash...

saab 95 '02 aero est as anyone changed the front sub frame o/s + n/s . and how do you adjust the handbrake too much travel (have tryed the reversing trick to no avail). failed it's m.o.t..

Just got a 2000 SAAB 9-3 for cheep. I knew it had been in a front end wreck but it was supposed to have been fixed. After getting it I noticed it was mainly fixed by zip ties. On one side of the bumper the frame that attaches to the bumper is smashed back about 3 inches and the bumper does not...

Hi The steel arm bolted to the 5th bow (4 torx) riveted (2) to the aluminum gear drive (drivers side) is fractured through the top rivet hole (photo available). I am pretty good with diy (not trained saab tech) & have little to loose but need advise as I don't have ANY useful information...

I have a 1987 900 with about 300K on the clock. I recently read a add for a used 900 that spoke about frame rot under the battery. The add said that it was a design defect that happens to all 900's??? The add went on to say that Safe-T-Frame sells a kit to fix the frame rail. I went on the web...

another problem that i need some advice on. The fabric on my soft top is in excellent condition and only about 5yrs old. Fully renovated it with the Autoglym hood restorer and it came up great. One (major!) problem. The front aluminium bow section of the roof (bit that attaches to the top of...

Hi, I've "got" a 2000 9-3 SE t convertible with the Hirsch engine upgrade (apparently 175 bhp). The car's been in the garage pretty much since I bought it due to various things including bulkhead separation which is due to be fixed next week. Thankfully I bought it from a main dealer...

Hi,I have just had the rear engine mount changed and the garage has told me that the Sub frame mounts will need doing shortly,how hard are they to change. Jim

I swapped out the manual seat for the electric seat on my MY1997 900GM Turbo. The leather bits were transferred over to the electric seat. I now have spare the bits that were inside the leather cover, that is the frame, trim, squab etc. If any one is interested in obtaining these rare and...

I'm looking to buy a 98 9-3 vert. Several that I have seen seem to suffer from corrosion on the vertical black frame between the front and rear window. I feel it ought to be possible to do a reasonable repair. Perhaps by cleaning out the corrosion between the steel and the plastic (?) coating...

13-ML-31594694-ML- Posted in wrong forum

Does anyone know if you can get just the black plastic frame bit for the drivers side wing mirror? Also, is there supposed to be a light in the glovebox? Thanks Paul