Saabscene Saab Forum - Saab Technical Information Resource banner
diameter
1-14 of 14 Results
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hello, Does anyone know inner diameter or GM Part number for leak off pipes? 2.2 Tid 04 reg. Thanks. tupta
  2. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I don't know if this has been a problem to anyone of you but the large steering wheel is getting in the way when I am trying to exit the car. I am definitely not large (180cm tall, 85Kg). I have lowered the seat. I have moved the wheel as high as possible but not distracting/hiding the view of...
  3. Saabscene: Performance
    Hi can anyone tell me what diameter the hole in the rods for the gudgeon pin is on a set of standard saab rods, and also if possible the width of the rod too. I notice that the pistons are 90mm, and YB cosworth ones are 90.9, so just wondering how trivial a swap it would be to go to some as a...
  4. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Can anybody please confirm the brake disc diameter for a standard July 2004 9-3 Convertible, 2.0t Vector Sport? Cars has done 50,000 miles & the pads are a little low/discs have ridges, so I want to change them while we have warm weather!. Thanks in advance..
  5. Saab 9000 (1984 - 1998)
    What is the diameter of the alloy intercooler pipe where it attaches to the rubber pipe on the throttle body? I have installed an intercooler from a later model onto my 93 and the alloy intake pipe lines up with the rubber pipe attached to the TB but it doesn't reach, its a few inches too...
  6. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I have found loads of references to replacing the fuel return pipes, but none seem to mention the specification of them. I want to do it myself and it doesn't look too hard, but where do I get them from? Surely I don't need to go to the dealer for them - they look like ordinary flexible fuel...
  7. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hi I am new to my 9-3 2.2TiD after previously having classic 900 Turbo's (with a few years away from SAAB). Managed to find a 51 plate 2.2 tid se with half leather for 2600 so quite pleased with the car all in all. But i am having a few starting problems that i hope to fix with replacing the...
  8. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Can anyone tell me th size of the front ARB on a 1997 UK NG 900 turbo SE - I need to stick new bushings on it but that come in three flavours: 19, 22, or 24 mm ...depending on what the diameter of the bar is.
  9. Saab 9000 (1984 - 1998)
    I wrote this down, but have since lost the paper! I'm too lazy to run out to the garage and pull the wheel off - besides, it's very cold out there this evening. Does anyone know what the hub diameter is? IIRC, I think it's 65 mm, but not quite sure.......thanks in advance!
  10. Saab 9000 (1984 - 1998)
    I wrote this down, but have since lost the paper! I'm too lazy to run out to the garage and pull the wheel off - besides, it's very cold out there this evening. Does anyone know what the hub diameter is? IIRC, I think it's 65 mm, but not quite sure.......thanks in advance!
  11. Saab 9000 (1984 - 1998)
    Does anyone know what the standard exhaust diameter is on the 9000 2.3 97 MY system is ? Many thanks
  12. Saab 9000 (1984 - 1998)
    Does anyone know what the standard exhaust diameter is on the 9000 2.3 97 MY system is ? Many thanks
  13. Saab 9000 (1984 - 1998)
    Its about time for some new ARBs anyone know if my car is 18 or 19 mm. I've tried an 18mm spanner and it wont go over front or rear but this is a bit of a crude measurement. 1994 9000CSE 2.0 non turbo
  14. Saab 9000 (1984 - 1998)
    Its about time for some new ARBs anyone know if my car is 18 or 19 mm. I've tried an 18mm spanner and it wont go over front or rear but this is a bit of a crude measurement. 1994 9000CSE 2.0 non turbo
1-14 of 14 Results
Top