Search Results for ‘crank’

Hello have picked up a Saab with the following problem. Went into limp home mode and managed to get it home. Went to start it again and it wouldn’t start. Problem has progressed now to it won’t even crank. I can get it to crank by putting a live to the starter relay but it still won’t start.

For the last month or so my automatic gearbox Dame Edna 2007 Aero increasingly won't crank, with it sometimes taking 10-15 mins to get going, especially when the weather is cold. I replaced the battery with an especially large one but that didn't make any difference. When I turn the ignition...

Forgive me if this sounds naive to those in the know... Does the Classic 900 (vert on a '92 J) have a Crank Position Sensor (CPS)? I have an intermittent fault on my rev counter / tacho it keeps dropping off and then bouncing bak to life. The car is also sluggish to turn over on start up...

Hey guys I'm wondering where about the Crank Sensor is on my '98 2.2 TiD? I'm thinking that either a clean/replace MAY stop the CEL coming on, when everything seems ok. Any help would much appreciated. Jim

Dear all, Have a misfiring car 2.0 lpt with red DIC, I have checked out postings and the symptoms of problem match a CPS problem others have had. Where is the sensor, how easy is it to change (ie can a shaved monkey like me do the job), Where can I get replacement any ideas of cost? thanks in...

Hi, can anyone supply me with some details, or even better some pics, of the wheel and sensor used for the crank sensor? Am I right in thinking none of these engines have cam sensors? But the N/A ones have a dizzy?

HI, Got a problem with my 9000cse 2.3 fpt.Cut out on me yesterday,waited a while,then it started again.When it got hot,it cut out again.RAC came out,he reckons its the crank position sensor.It is definately not fuel,as we sprayed ether into throttle housing with no sign of it starting.When...

Hi,I am in desperate need of a crank sensor for my 1996 9000cse 2.3 fpt,just packed in on me.I live near Lancaster.My mobile is:07847 454 752. Cheers,Dave.

Hi,I am in urgent need of a crank sensor for my 1996 9000cse fpt,for the weekend if poss.I live near Lancaster if anyone is nearby,cash waiting,Dave.07847 454 752

Hi All Im very new to old Saabs but bought a 1992 9000 non turbo, single coil version off ebay last year and it has gone very well. Failed MOT on headlight alighnment so has sat on drive for about 6 weeks and today decided to sort. Didn't want to flatten battery whilst sorting lights so had...

New to the forum. Have a 9000 Turbo that had some engine work done, so I have replaced the bearings and rod bearings on it. Now, with the engine back in, and the timing done, it won't crank! Does someone know how to get the engine to crank without starting it, so that I can get the oil to...

I decided to replace the whole crank case kit on the Aero at a cost from Saab of £85 in VAT it was really more from peace of mind but on removal and successful replacement, I did slit them all open. Only the one from the valve cover to oil trap showed any signs of degredation and this was really...

Hi guys, had a few weeks off intermittent starting with my 9-3 2.2tid vector, its a 2004 53 plate. It sometimes starts straight up, other times engine turns but doesnt fire. anyway have been told that the crank position sensor is a likely contender for the problem so have got one ordered to...

Hi, I was checking the vac lines on my 1992 900 LPT auto whilst doing a coolant flush, and the little pipe on the plastic doofer snapped off! I barely touched it - better now than on the road I suppose. Its the crank case breather nipple that sits on top of.... the crank case. As I was parked...

dear all, first i would like to say that i live in bosnia and i'm not origin english speaker so my apologize for any grammatical mistakes.. ;) i made research through forum trying to find similar problem that i have for the last year on my saab 900 se turbo, 2.0, 1996. so i have problem with my...

Hi guys, I've been waiting for a new turboairpipe connector from Saab for nearly 3 weeks now, as previous one had a split, apparently it still on its way from Sweeden. Anyway I've been driving my car in limp home mode for the duration of the time that I've been waiting, and on Thursday it...

Hi guys, I've been waiting for a new turboairpipe connector from Saab for nearly 3 weeks now, as previous one had a split, apparently it still on its way from Sweeden. Anyway I've been driving my car in limp home mode for the duration of the time that I've been waiting, and on Thursday it...