Hi everybody, Does anybody, by any chance have a diagram of the hose connections on the throttle body of a saab 93 2.31 1998 (NON TURBO) Thankyou

Hi. I've just bought a 1997 9000 with a blown engine as a parts car for my 1992. One thing I noticed was that the battery cables are swapped around on the two motors. On the '92, the negative lead is facing the firewall, but on the '97, the negative lead is at the front. That nearly caught...

Hi, Im changing my speakers over and would like to leave the car wiring intact in case I ever want to revert back. To do that ideally Id need some of the connector blocks that connect to the car wiring and then solder the leads onto the new speakers. Can you buy these things or are they not...

Hi all. I've finally got all the bits together for my attempt at retro fitting electric, heated, memory Aero seats to my 9-3 SE. I need to feed the power seats directly from 5 and 16 on the fusebox, but there are no wires in there and I was just wondering if anyone could suggest whay sort of...

Hello everyone - am hoping someone can help... Seem to have intermittent failure of coolant sensor - have changed it and same problem, can't find an obvious bad connection by wiggling wires so thinking of replacing the wiring from the sensor to the engine management system - does this make...

Can anyone tell me or post a photo of which pipes go to what on the BPV/Dump valve solonoid on the bulkhead? I had removed mine pending investigation and now cant remember what goes where :mad:

just a little tip that may just keep you on the road when doing the sump job on the 9-5, i had to disconnect the 2 exhaust sensors at the connectors. I noticed there was some corrosion on the connector pins, an old tip from a friend that restores classic and vintage cars told me to use...

I know this is the sort of question that'll get the cognoscenti shaking their heads in disbelief but I need to know!! Anyway - there's a connector down low behind the O/S headlight that I believe sends some of the water from the washer bottle down to the headlamp washers - possibly.. and it's...

Does any one have a list or an image of the 08 Nav Unit Connections ? I've had a photo sent to me from an ebay item but its too grainy to work out what they are..... Thanks In Advance Terran PS I thought these where Denso and not Grundig etc...

Just replaced the intake manifold gasket on our 2.0 CS XS (non-turbo) and I just want clarification on where the small pipe that fixes to the bottom of the fuel pressure regulator (on this engine this is not fixed to the injector rail), joins to? Does it fix to the intake manifold body? Layout...

As he has mentioned in the past, Swade’s better half, Mrs. Swade, has family near the Pacific coast of Canada in the province of British Columbia. It appears that the connection has paid dividends with the Vancouver Sun, the newspaper that serves that region. Mr. John Turley-Ewart, a writer...

I posted an initial bunch of Saab musical connections back in December and a few more popped up in comments to that post. In addition, I’ve received a link from Ivan with a C900 Convertible in full feature during a Hungarian group’s film clip. So here’s a few more Saab musical connections to...

There have been some official Saab musical connections, especially recently. You’ve got Release Me, by Oh Laura (and Andy Rupert), which heralded Saab’s BioPower models. There’s also the more recent Through Your Eyes by Nina Kinert, used for the 2008 Saab 9-3 range. There’s been a number of...

I just changed the clutch slave and reinstalled the starter. There was a long interval between the time I took the care apart, and delt with getting parts, and returning the wrong parts ect. By the time I got back to the starter I could not remember if two wires connected to the top starter...

I imagine tht this has probably been disucssed to death previously but I cannot seem to locate a thread which details the connections of the SAAB 9-5 telephone wiring loom for a MY2001 905 estate. Does anybody happen to know what they are? Cheers.

Looking for some advice please. Was renewing the spark plug leads earlier today having dismissed the "if it ain't broke don't fix it" but... you've guessed it...I did not take enough notice of the connectors sequence on the distributor So could anyone tell me the sequence if I am looking...

Looking for some advice please. Was renewing the spark plug leads earlier today having dismissed the "if it ain't broke don't fix it" but... you've guessed it...I did not take enough notice of the connectors sequence on the distributor So could anyone tell me the sequence if I am looking...

Hello everyone. On the back of the starter motor, there is the large connection to the battery, and 2 "blade terminals". I have one yellow line that I remember going to the right blade, but does anyone know what goes to the left one, or is there even anything? I think I remember something...

Hello everyone. On the back of the starter motor, there is the large connection to the battery, and 2 "blade terminals". I have one yellow line that I remember going to the right blade, but does anyone know what goes to the left one, or is there even anything? I think I remember something...

Behind the the LHR boot space trim, in addition to the CD-Changer loom connection is another unused block connector - does anyone know if this is intended to be used for the trailer socket wiring? Thanks in anticipation