Saabscene Saab Forum - Saab Technical Information Resource banner
clamp
1-19 of 31 Results
  1. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    The hose clamp which holds the filling hose (rubber) to the plastic fuel tank is terribly corroded. Up to now I tried spraying anti rust, tried it with screw driver and other tools - in vain. :mad: :o I am afraid to approach with a saw due to the terrible connection rubber/plastic. Has...
  2. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I have read about this in some of the older threads. Does anyone know where I can buy the kit from as it seems to be a worthwhile modification? I live near Dundee on the east coast of Scotland. Are there any members nearby? Cheers to all, Paul
  3. Saab 9000 (1984 - 1998)
    Hi Folks, the subject says most of it... I noticed some creaking noises coming from the front area when driving over uneven surfaces and found that the uppermost of the two bolts that hold the C piece that goes round half of the gearbox mounting bush isn't there! As a result the box is...
  4. Saab Parts / Accessories, FOR SALE and WANTED
    As per title please, I'm after a 02, 9-3 Aero steering rack clamp and brace. - PFS Abbott etc Thanks
  5. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    just bought a steering rack clamp for my 2001 saab 93looks ok to do but does anyone how to get the bolt out from under the brake servo to releas the rubber clamp
  6. Saab Parts / Accessories, FOR SALE and WANTED
    Wanted steering Rack Clamp & Brace and a 3’ downpipe with cat made to go back into the factory exhaust
  7. Saab 9000 (1984 - 1998)
    My lovely 94 Aero recently started sounding like a tractor and misfiring. A trip to the local garage and a look under the bonnet show that a clamp from the turbo pipe has disappeared, causing a major leak in the system. Where the clamp should be is shown by the red arrow. Is it possible to...
  8. Classic Saab 9-5 (1997 - 2009)
    I think that's the right term, the nut sheered off when I went to reinstall the battery, its all one part (nut and wedged taken out of it base thing) it would be ace if I knew what the thing was called... anyhow I need one and dont have a local saab dealership, so does anyone have one?
  9. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I just noticed that one of my cable clamps has a crack on it. I am talking about the white cable clamp (PartNo: 55353895) that controls the right/left movement of the gear lever (6-speed manual) and holds one end of one of the gear cables (there are 2 cable clamps there, one for each gear...
  10. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Allo, `Her` saab is a 1996 (or thereabouts) NG900 2.0 auto normally aspirated. i have recently upgraded `his` saab 9-5 2.3 stage1 to koni suspension and this has lead to a little upgrade-envy and a fair moan about the 900s handling and in particular steering response. i am thinking about...
  11. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Just fitted one of these to my 2000 LPT convertible, and wow what a difference! This is by far the best mod I've done to the car (until the Koni's are fitted ;-)) and I can seriously recommend the mod to all. I don't think it matters where you get the kit from, be it Abbott's own, or copycat...
  12. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I'm having the repair work carried out on the bulkhead of my 98 SE Coupe in the very near future, and after reading various posts have decided it wise to invest in an uprated clamp and brace, also poly bushing the offside mounting. Just wondering if anyone has had any experience with the an...
  13. Saabscene: Performance
    Some of you may have read an issue I had with a steering rack clamp a while ago where the rack was moving in the clamp but this was later resolved with some packing. However I have now noticed that when the car is stationary and the steering is moved from side to side the wall of the body shell...
  14. Saabscene: Performance
    Hi, I've "got" a 2000 9-3 SE t convertible with the Hirsch engine upgrade (apparently 175 bhp). The car's been in the garage pretty much since I bought it due to various things including bulkhead separation which is due to be fixed next week. Thankfully I bought it from a main dealer...
  15. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I'm having my bulk head seperation repaired next week and I was going to get the garage to fit a clamp and brace to make sure it doesn't come back and to help the car's handling. Is this required if he car is being repaireed anyway, and can anyone recommend which one to buy. My car is a 2000...
  16. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I've fitted an MP Performance steering rack clamp and brace to my 2000MY 9-3 convertible. It's made a worthwhile improvement but, like an idiot, I overtightened the top bolt on the clamp which screws into a threaded bolthole on the bulkhead. So, I've stripped the thread in the bolthole :-( I'm...
  17. Saabscene: Performance
    Fitted mine today, took an hour or so. The job isnt too fiddly, lost some skin on my knuckles but nothing too heavy. The difference is very good with the turn response to the wheel. Next job is to fit my KYB GR2 dampers & Apex springs. I have sourced a very good SAS anti roll bar upgrade in...
  18. Saabscene: Performance
    Guys, I am planning to either get either an upgraded ARB or a Steering rack clamp for my 2002 9-3 Aero, if was just to buy one which one would you suggest as the most beneficial?? G
  19. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Just asking for advice. I fitted the rack clamp & brace a few days ago, the instructions said not to overtighten the bolt and nut. Just asking anybody who has experience of fitting, did you tighten right up or only enough for the clamp to grip the steering rack body tube. Thing is I was probably...
1-19 of 31 Results
Top