Saabscene Saab Forum - Saab Technical Information Resource banner
busy
1-17 of 32 Results
  1. Chat
    Got track ends and racks ends to do todaybefore my full geometry on monday. so in 2 weeks the car has had new shocks new springs new drop links new lower arms new track rod ends new rack ends new front tyres 245/40/17s even with out full geometry grips like a goddess but steering...
  2. Saab Forecourt
    Had my vector about 9 months now... And i got a bit bored of it looking like this every day..... So i had a busy weekend... And here's the result of my labours.....
  3. Saab 9000 (1984 - 1998)
    hi all as it says yes ive got a busy weekend ahead got to go work for about 3 hours tomorrow then will be working on my car trying to fit this lot rear shocks and springs and sturt brace look easy to fit just front shocks and bushes look like they going to be a problem has anyone got any...
  4. Saab 9000 (1984 - 1998)
    Spent part of this afternoon removing the pinstripe I used the small model iron I use for model covering R/c aircraft and then tried various option to remove the glue - meths(hic!), whitespirit, T-Cut (Seems to work best polishing it off) You can see the rust on the nearside wing...
  5. Saab News
    Got this in via email this morning. Here's an extra incentive to get the HDV camera out again..... ----- ----- Lowe-Brinfors are the Swedish agency that create all those gorgeous Saab ads we like to look at. Lowe have been handling Saab's ads for years now and it's my personal...
  6. Help, Advice, Saabs and Motoring
    It's going to be a busy week ahead for some of the Microcat36 fleet, i have the 9000 3.0 CSE, 9000 3.0 Griffin and the 900 t8 to MOT, I think the 3.0 CSE will walk it, i am not sure of the 3.0 Griffin as it has been laid up for a while and i don't know if it has done it any harm, the 900 t8 will...
  7. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Had a few jobs to do today: <ul type="square"> Replace worn front discs with EBC Grooved & Dimpled discs Replace pads with EBC Red Stuff Replace skinny rear ARB with thicker Elksport/Taliaferro jobbie Remove 3 Spoke Double ALU36 Aero wheels with 215/45 P7000s (now sold & being...
  8. Saabscene: Performance
    Spent all weekend working on the car...close to divorce I think Completed the Speedparts big brake kit on Saturday (apart from braided pipes) Only driven 35miles with them fitted sofar, but I think they deserve a big after only 30 miles they were performing better than the Black Diamonds with...
  9. Customer Service Desk
    It is obvious that there's been a lot of work done here. Well done to all concerned, and congratulations on the revamp. Are the useful sticky items going to be resticked?
  10. Saab 9000 (1984 - 1998)
    finally fitted the ylee pipe to the carly and a RRFPR... on the rolling road we were running a little lean.. after much modification and relocation of the terminal block we got it to fit .. and a new exhaust pipe...
  11. Saab 9000 (1984 - 1998)
    finally fitted the ylee pipe to the carly and a RRFPR... on the rolling road we were running a little lean.. after much modification and relocation of the terminal block we got it to fit .. and a new exhaust pipe...
  12. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Alloys were a bit scuffed so had then stove enamelled at work. Came up a treat http://www.saabphotos.com/gallery/Saab-SE-Sport/Saab_A http://www.saabphotos.com/gallery/Saab-SE-Sport/Saab_B
  13. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Had some time on my hands and a spare grill so....... Let me know what you think, still at the undecided stage. I made up the stickers on the wing at work; bit of a laugh and old hat I know. I have a spare if any one is interested-free of course! http://www.saabphotos.com/gallery/Saab-SE-Sport
  14. Saab 9000 (1984 - 1998)
    Well, this saturday just gone, me and my friend Fox had a busy day planned working on our 9000s! For mine, simple orders of the day were to clean the idle control valve, and fit poly rear ARB bushes. Fox was slightly more ambitious... 3" JT from the turbo back, new engine mount, replace front...
  15. Saab 9000 (1984 - 1998)
    Well, this saturday just gone, me and my friend Fox had a busy day planned working on our 9000s! For mine, simple orders of the day were to clean the idle control valve, and fit poly rear ARB bushes. Fox was slightly more ambitious... 3" JT from the turbo back, new engine mount, replace front...
  16. Saab 9000 (1984 - 1998)
    As you may have read earlier, wasnt of to a good start when the bonnet wouldnt release, but a try to my local saab specialist (BPV Saab in slough) and that was sorted. Get home and get the EZ Bleed out and do a brake fluid change to Dot5.1 (used 2 ltrs). Wow what a difference the pedal feels, a...
  17. Saab 9000 (1984 - 1998)
    As you may have read earlier, wasnt of to a good start when the bonnet wouldnt release, but a try to my local saab specialist (BPV Saab in slough) and that was sorted. Get home and get the EZ Bleed out and do a brake fluid change to Dot5.1 (used 2 ltrs). Wow what a difference the pedal feels, a...
1-17 of 32 Results
Top