Saabscene Saab Forum - Saab Technical Information Resource banner
bracket
1-20 of 32 Results
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    My girlfriend backed out of our driveway catching the drivers side mirror on our gate and breaking the bracket that mounts It to the Inside of the door. It's a simple little bracket that's held on Inside the door with three screws and attaches the mirror to the door. I can't find this little...
  2. Saab Parts / Accessories, FOR SALE and WANTED
    I am looking to buy both brackets for the rear 9-3 convertible bumper. Part numbers 12830626 and 12830627. I also want the nearside bumper rubbing strip 12788006 please.
  3. Saab Parts / Accessories, FOR SALE and WANTED
    Hello All, Just had a failure and need a spare part PDQ to get back on the road. Its the small casting that carries the aux belt tensioner on a 2.3 aircon engine. It bolts to the timing case (aka front cover) with 2 hex bolts and 1 countersunk star drive screw. I could do with the countersunk...
  4. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    My pads and discs look about ready to change. Just checked my Haynes manual for specs and it says the torque for front caliper bracket is 210Nm + 30deg, rear 130Nm + further 45deg. The front torque seems incredibly high - more like the kind of value to hold hub nuts on! Does anyone please know...
  5. Saab Parts / Accessories, FOR SALE and WANTED
    for 1996 CSE - need the bracket that fixes the front No pate to the bumper. They tend to rust out and the captive nuts fail. If you've got a good one let me know. Dave
  6. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hi. Does anyone know if the bracket which bolts to the antenna motor and the inner rear wing to steady the antenna is available anywhere for a reasonable price or where i can get one please and how much they are? Cheers. Mick.
  7. Saab 9000 (1984 - 1998)
    Hello, Trouble at mill.  Lost power steering today, pulled over and at first sight it looked like the serpentine belt had slipped off.  Further investigation, however, revealed that the (quite new) tensioner was lolling about. It looks like bracket that the pulley part of it (as opposed to...
  8. Saab Parts / Accessories, FOR SALE and WANTED
    Hi Hoping someone can help, I need the bracket which carries the power steering pump and idler pulley for a 9000 - mine decided to break last night. Cash waiting. Thanks.
  9. Saab 9000 (1984 - 1998)
    Patient in question is a 88 9000S whose ignition cylinder gave up the ghost (electrical connector on the back of the cylinder is inop). We have another entire steering column with bracket and ignition stuff and key and all that good stuff: Now how to put the working cylinder in the car? Can we...
  10. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    Hi could anyone let me have the measurements of the drop bar that hangs from the back bumper to connect to the first section of the towbar on a 93 year 2002 old model. The bars are the same on the GM900. The bar is a Towsure but the plate should be the same on all the makes. I let mine go with...
  11. Saab 9000 (1984 - 1998)
    I am replacing the engine in a 1993 9000CSE non-turbo. Found a replacement, got old one out, moved transmission and other parts over and I have the bracket below left over. I'm pretty sure I took it off the old engine, but I'm not sure from where. Can anyone tell me where it goes??? Thanks...
  12. Saab Parts / Accessories, FOR SALE and WANTED
    Just what the ad said. I have paypal and used USPS as shipper thanks james
  13. Saab Parts / Accessories, FOR SALE and WANTED
    Hi All Work have ordered me in error a Brodit screw free dashmount clip / bracket. The error was they have ordered me the one for a passenger glovebox and not the one for a passenger airbag. Someone is welcome to have it for the price of postage. Its actual description is: Brodit ProClip Saab...
  14. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hi Chaps, I happened across a company who make a bracket to enable an HP iPAQ 3715 PDA to be fitted to the console along side the gear lever. Unfortunatly I didn't save the website and I can't find it again. I would be most grateful if anyone can point me in the right direction. many thanks, Ian.
  15. Classic Saab 900 (1979 - 1993)
    Despite retensioning the ps pump belt from time to time I notice the occasional slip on full lock etc. There appears to be some movement with the bracket attaching the pump to the engine. I looks like the welds on the bracket have started to split apart,preventing the pump from being fully...
  16. Classic Saab 900 (1979 - 1993)
    Hi everyone..... I noticed the other day that my front bumper is hanging on 2 very rusted brackets. On the right side, the bracket is practicaly rusted right through and I imagine with a good hard kick it will completely disconect! So how do I fix this? Well, I could take it to a shop and get it...
  17. Classic Saab 900 (1979 - 1993)
    Sorry if the title is not very clear but there is some kind of metalwork around the matrix of my intercooler that is very coroded. I have not tried to dismantle as the chances of putting it back look small Can anybody give me some guidance or pictures on what pieces are in there ? Is it...
  18. Help, Advice, Saabs and Motoring
    Not sure if this has been covered here so far but have search and got no results so here goes. I am looking for a phone cradle for a Nokia phone. The type of cradle I want is the sort that fits to an air vent. I have googled and have found some cradles but in the main these fit to the side of...
  19. Saab 9000 (1984 - 1998)
    Is there a trick to removing the headlight from the mounting bracket? I have two, one with a broken lense and the other with a broken bracket so I was hoping to swap the good bracket to the good light. It looks like I'll have to pry, best I can, the adjustment screws from the plastic grip. Is...
  20. Saab 9000 (1984 - 1998)
    Is there a trick to removing the headlight from the mounting bracket? I have two, one with a broken lense and the other with a broken bracket so I was hoping to swap the good bracket to the good light. It looks like I'll have to pry, best I can, the adjustment screws from the plastic grip. Is...
1-20 of 32 Results
Top