Saabscene Saab Forum - Saab Technical Information Resource banner
bolts
1-20 of 108 Results
Advanced
  1. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Does anybody know the size of the rear calliper carrier bolts? I haven’t got any female Torx sockets that big never needed them before :mad: Want to make sure I get a set with one big enough. Any bigger ones anywhere on the car?
  2. Saab 9000 (1984 - 1998)
    Hello Everyone, I am going to replace the head bolts this week-end and correct me on this. 1. loosen the radiator cap before I start. 2. do one bolt at a time 40 nm, 90nm and 1/4 turn. Seems easy enough, I'll also be replacing the valve cover gasket and sparkplugs as well. It's a '95 9k CS with...
  3. Classic Saab 9-5 (1997 - 2009)
    For those who like details..............pic of my roof bars to which I've just added eye bolts. Makes for much easier lashing of loads. It's a much more involved job than on the 9000 bars, where you can get to the nut without dismantling.
  4. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    I noticed today that I have a bolt missing. On the interior of the boot, where the little recessed handle things are that you use to pull the boot down on closing. It has a star head on it, black coloured bolt sitting in the recess I could do with knowing the spec to sort a replacement, I...
  5. Classic Saab 9-5 (1997 - 2009)
    Hello All -- Just been informed that the DMF on my 2006 1.9TiD 150bhp needs replacing (with the two-part clutch and slave cylinder!!) Is nothing ever easy? The quote is over £1150 There is mention of over £50 just for the bolts. Does anyone know just how many bolts there are and perhaps the Saab...
  6. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    hi does anyone know the part numbers for the six front subframe bolts on a 2001 9-3 2.0 se turbo thanks
  7. Tyres, Wheels, and Brakes
    Well it's happened again, the car went in for a service a few weeks ago and it appears they've tightened the bolts up with a gun including the locking nut. I've tried to take them off because of a nail in the tyre but couldn't get them to budge and have broken the locking nut key. This is the...
  8. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I am going to retorque the head on my 2002 93 Aero using new bolts. Has anyone got any information on the procedure for this. I have read loads of conflicting information on line. I did retorque my last saab Aero but did not use new bolts and it cured the slight oil seep on the front right side...
  9. Saab Parts / Accessories, FOR SALE and WANTED
    Hello, long time since Ive been on here my car got written off a couple years ago. I have some new unused parts collecting dust, and will soon be throwing them away if noone wants them. Mine was a 1991 B234i engine, 9000 SE the SCC computer was from another model but works in mine also...
  10. Tyres, Wheels, and Brakes
    having changes my winter tyres back to summer tyres it is apparent that one of the locking wheel nut patterns is losing integrity - such that using the wheel brace with the car it's pretty impossible to get the nut off. This probably contributed to the damaged adapter which I had to get...
  11. Saab 9000 (1984 - 1998)
    Many moons ago I seem to remember someone posting a detailed procedure for checking all the crucial bolts under the car working from back to front. can anyone point me to it?
  12. Saab Parts / Accessories, FOR SALE and WANTED
    Brand new set of Mcguard bolts m12x1.5 set number 27179 Check their website for exact fitment although these are the set for the 9-3 SS £40 new £25 delivered
  13. Saab 9000 (1984 - 1998)
    Hello, I'm having problems finding the correct camshaft inner bearing cap bolts for an early 16v engine. The car is a 9000 2.0i 16v 1988. (Same engine used in Classic 900) I snapped one of the bolts and have since struggled to obtain a replacement. The bolts on my engine are hollow to allow...
  14. Saab Parts / Accessories, FOR SALE and WANTED
    When investigating the cam followers on my T16 engine I managed to break one of the hollow camshaft inner bearing cap bolts :mad: (the inner ones next to the spark plugs that are hollow for oil to go through). I was wondering if anyone had a broken T16 engine and so some spare bolts? Also, I...
  15. Saab 9000 (1984 - 1998)
    Ive got to replace the exhust downpipe as turbo90 bend snapped at the trubo union. So i got (a nice after market one) and managed to remove the turbo end and o2 sensor without too much hasle and the olde wd40. My problem is the nuts on the union between the downpipe and the cat dont seem to fit...
  16. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Hello everyone again got a small thing thats really annoying The underside of the front and rear wings the plastic covers are not secure in place correctly any help in making these panels not rattle and not amplfiey any noises going over pot holes?? Any Advice would be great also is it the...
  17. Tyres, Wheels, and Brakes
    Need to replace the front discs and pads over the next couple of months. Can anyone advise the size of Torx socket I'll need to remove the calipers (2004MY Aero)? I found out the hard way that they were Torx last time they needed replacing - got everything half stripped out & couldn't get the...
  18. Saab Parts / Accessories, FOR SALE and WANTED
    I have a BRAND NEW set of Mcguard bolts for sale bought for my Saab 93 but not needed Model 27204 for wheel type: alu Type: Lockable wheel bolt Thread size: M12x1,5 Seat: 60°/cone Shaft length/total length: 24,0 mm Hex size: 17 mm Never even opened and posted these will be £30 Also going hot...
  19. Saab 9-3 Sedan/Combi/TurboX/AWD(2003+)/Conv(2004+)
    Got these off ebay, but want to make sure I don't need different length wheel bolts to fit them.. Has anyone upgraded from the std 16 on a linear sport and put on 17 inch alloys (evo) and had any issues or have any advice? Cheers will
  20. Saab 9000 (1984 - 1998)
    Hey guys im a noob here, think im in the right place. anyway i have just got a 1997 saab 9000 2.0 turbo and the exhaust manifold is blowing, first off had a quick glance over to find that there are 5 bolts missing, so i got new gasket and bolt set, took off the manifold to find that the bolts...
1-20 of 108 Results
Top