Hello to everyone. I have a 2005 saab 9-5 arc sedan.just installed turbocharger. My problem is the oil feed line banjo bolt.i can't find a wrench or tool to fully tighten the banjo bolt and as a result I have an oil drip down onto the top of oil filter.i used an 11/16 wrench to tighten the bolt...

I fitted a new wheel bearing to my Saab 9-3 Vector Sports estate, yesterday, I had to wait for a new torque wrench to tighten the bolts as the manual says 210 nm ! only having few bolts to tighten I thought it would be easy but disaster, trying to get the E20 torx bolts to 210nm seemed extreme...

Does anyone know the part number for the pinch bolt that connects the front wishbone/ lower control arm ball joint to the hub? I am going to be changing both wishbones soon and the Haynes manual says you must not re-use the bolt

Just replaced front struts on my 2004 9-3 aero 2.0T. All went well until I over tightened the last bolt and it sheared off! :confused:Couple of questions, is it possible to drill out the remainder of the bolt without removing the suspension or will I need to replace the top mount. Finally will...

Valve,cam or rocker...Not sure of the official name, but regardless, one is leaking. I can't find the fastening torque anywhere and I'm hoping someone can help here. On more modern vehicles the gaskets are normally fitted dry although there are some cars, like a BMW e39, I once owned, which...

Any one know the bolt size used to mount the seat belt acceptors in the rear?

I have been renewing the metal coolant rail pipe at front of engine, the one that corrodes. Things were going well until I dropped a 13 mm bolt down into the radiator bottom hose!! I have been unable to get it out. I have completed the job topped up the coolant and all seems fine. What are...

Looking for a used turboback and intake, possibly other bolt on's. Reply or MSG me with what you got and what brand it is, as well as a link to where you got it. I don't really mind the brand, or quality (as far as cosmetics go, it has to be functioning). My offer will be reflected based on...

So, I managed to loose the front corner subframe bolt on my 9-5 aero wagon. The part number is 4597985I am just wondering if anybody might have any info such as length, width, threads etc. I am trying to find a replacement locally.

I spent an inordinate amount of time reading the threads on the PCV check valve, Crankcase Ventilation Pipe and the banjo Bolt. After thorough research and a lengthy wait for some parts I managed to complete my project and the vacuum is working superbly and the "check engine" light went off and...

Hi Folks, the subject says most of it... I noticed some creaking noises coming from the front area when driving over uneven surfaces and found that the uppermost of the two bolts that hold the C piece that goes round half of the gearbox mounting bush isn't there! As a result the box is...

:confused:I can't find a diagram or a description of the bolt that goes where I have the red circle. There is no bolt there and there is a circular part at the end of the tube for the emissions control tube (pipe) shown. Note the red circle where the bolt goes to secure it. I think it needs a...

Ok, on the backside of the turbo, under the heat sheild, the banjo bolt that is the coolant line, does anyone know what size washer that is or where to get one? Found the source of my leak, but can't find the copper washer.

I'm going to hose out my cooling system...... Well thats the plan, I'm just trying to to sort out a bitta geography before I start ..... I have a new Stat & body plus some pretty pink GM antifreeze too....... Must read up on the refilling proceedure too .......... I replaced the coolant pump...

Hi guys, I was trying to do my brakes and rotors/discs yesterday and I stupidly lost one of the caliper pins. Would anyone have a spare or know where to get one. I've been calling around as it's a very common part for Saabs, Volvos and Vauxhalls but they're all part of a full caliper set. I just...

I took all the airbox, tensioner and front wheel cover plate off .......and whoaaaaa Bottom torque bolt on Alternator Obviously the last 'Backyard mechanic' couldnt tell the difference between Torque and Allen key!!!! So now I may have to sell the car all for the sake of a dumb bolt :confused:

Hi Guys Servicing the car at weekend and 1 of the engine mount bolts is missing. Anyone know the part number. It’s the one on the drivers side at the bottom rear of the engine, the one that bolts to the car not the engine. Thanks

Hey all, I am new to this forum, but have had my 9000 for 7 years. I am rebuilding the top end, and having trouble getting the center pulley/damper bolt off. Any tricks to be aware of? Also, anyone who has upgraded the camshafts from stock and has a thought on it, please comment. Thanks!! Scott

So on my 95 9000 im getting a small oil leak front right side of the engine near head gasket. Found out it could be the head bolts needing a re-torque. my 9000 just hit 200k. What is needed to do this? Do I just take valve cover off then torque to 30 ft/lbs?

Hey folks...I had a bolt fall out while driving and wanted to see if anyone knew the size before I have to pull one out from the other side to figure it out. This is a black bolt that runs through the front of the wheel well and holds up the plastic flap that sits between the wheel well and...