Saabscene Saab Forum - Saab Technical Information Resource banner
blend
1-14 of 14 Results
  1. Classic Saab 9-5 (1997 - 2009)
    Live my aero, but drive it in winter with no defrost or heat on floor. Help please
  2. Saab Recommendations
    http://www.eurocarparts.com/ecp/p/car-accessories/engine-oils-and-car-fluids/engineoils/5w30-engine-oil/?521776041&0&cc5_247
  3. Saab Parts / Accessories, FOR SALE and WANTED
    ************************************************** * Please note that the facility to advertise an item or car for sale is only available to those who have been Saabscene Members for at least two full months and have accrued at least 10 posts (non-sale posts, obviously). This is because...
  4. Classic Saab 9-5 (1997 - 2009)
    Hi Just joined Saabscene i Live in Reading UK ,I have owed various Saabs since 1980 . 99GL 900GLS 9000S Currant Car 9.5 eco i gained some good information as a Guest by reading Workshop Forum .Having ACC problems
  5. Classic Saab 9-5 (1997 - 2009)
    Hi Gents, Had noticed clicking form dash area with a/c on ---did the code pull -found the broken arm. re-enforced it with wire --and it now moves the metal arm (so hopefully shaft wasn't broken). However.......there is still the clicking --this time (with benefit if glove box out) its coming...
  6. Help, Advice, Saabs and Motoring
  7. Classic Saab 9-5 (1997 - 2009)
    I need to replace the blend door motor on my 2001 Griffin, I have possible access to a working left hand motor. The EPC shows only one part number for the motor but a LH and RH motor bracket, I am assuming therefore that the motors are interchangeable?
  8. Saab Parts / Accessories, FOR SALE and WANTED
    Hi all, I bought this for my 9-5, then sold the car 2 weeks later. I opened it, but never fitted so its as new. I bought this item for £82.25 plus postage. £60 plus postage? [attachment=50:Screen_s...19.10.08.png]
  9. Classic Saab 9-5 (1997 - 2009)
    Hi guys. I have many of the symptoms of the 08 code blend door problem but no error code showing. There is no heat coming from either of the front vents. I've removed the blend door motor and, although there is a crack in the white arm, the metal rod which comes from the arm moves as the...
  10. Classic Saab 9-5 (1997 - 2009)
    Hi guys, I understand that Saab now do a repair kit for broken blend door shafts. Has anyone seen/used one? If so, is it any good and how much does it cost? I think that the aluminium one that is available is a rip off. Regards Tony.
  11. Classic Saab 9-5 (1997 - 2009)
    When I calibrate my ACC I get 1 fault no. 11. (press AUTO + OFF) According to this site, fault 11 is "right blend door, loose": http://www.saabservices.com/9-5%20ACC%20codes.htm The following site contains error codes for the Saab 9-5 ACC, but NOT my fault (11)...
  12. Classic Saab 9-3/GM900 (1994 - 2002)/Conv ( -2003)
    I'm cynical of the majority of anything that's released as being "better." The new Mars Bar was skanky. CIF as the new GIF. That sort of thing. But a colleague was ranting on about how he could dip his finger into BP Ultimate Diesel and it didn't smell of diesel, oh and the car was quieter...
  13. Classic Saab 9-5 (1997 - 2009)
    I need to fix my door blend shaft on the passenger side, error 08. Have found this site that sells a eplacement part for approx £100. Does any know if it is any good? http://thesaabsite.com/95/saab%2095%20heat...%20aluminum.htm tony
  14. Classic Saab 9-5 (1997 - 2009)
    On a 2000 9-5 SE V-6. I have the problem with the blend flap not closing or opening all the way. It is the drivers side that is affected. I get plenty of heat when I change the temp to HI but when I change to LO I get moderately cold on the drivers side and very cold in the passenger and...
1-14 of 14 Results
Top