Search Results for ‘b202’

Hello everyone, i have a 9000 B202R italian aero that has the dreadfull LH 2.4.2 system on it and i am sick and tirred of this system, i have found a 9000 from 96 that has a B204L engine on it and i wish to buy it but can someone make a list of what components should i take besides the engine +...

hi everyone i am looking for a intercooler to inlet long aluminium pipe for a b202 engined saab 9000 fpt my car has the intercooler with the holes at the ends at 45 degree towards the ground with the rubber elbows not the one with the holes at the rear pointing towards the engine at 90...

Hi everyone. I have a 1993 SAAB 9000 2.0 FPT 185HP B202R Jetronic , Can i swap my ecu and fuel module with a B234 one ? Like plug and play ? I just can`t find any way to tune my engine :( I have searched for a carlsson ECU to give me 204Hp but no luck . Any ideas would be welcome . Thank you

Hi all looking to put some 2Nd hand timing gear into my 1989 b202 engine from a 1990 b204 engine. Just wondering if all the gear listed below would fit? Thanks Camshaft sprocket gears,Crankshaft sprocket gear,Timing chain tensioner, Tensioner Seal,Sliding Rail (guide), Lower Rail (guide), Upper...

Hi there, to cut the long story short I have got a bare block with head and 2 pallets of bits and pieces which used to be a complete b202 1992 turbo engine. I want to re-assemble but have difficutlies as it is sometimes non-intuitive apparently. A few pictures of a complete engine (esp. belts...

Guys, I have for sale a BRAND NEW still in it's Saab box, cylinder head and cams for the B202 16 valve 2 litres engine - part number 7586134, which, according to the EPC, is for a classic 900 1986-1989 and the 9000 for the same years and is no longer available from Saab. As I say, it's unused...

Wife brought my car home one rainy night, complained the ABS had come on and the brake pedal was really hard but it had sorted itself out (put this down to the water in the sensor trick), next morning, the car wouldn't start. So far it's had new plugs, rotor arm, distributor cap, ignition...

Hi everyone, I've just recently purchased a 1988 900i with an 8v fuel injection system, and I just cant help thinking about swapping the engine out for a newer 16v B202, like i have in my 1993. I was just wondering what the main differences are in reliability between both the B201, and the...

I have a much-travelled late '93 9000CD Auto B202-engine of 1985 cc with a Bosch Jetronic ECU (it's been shipped from Hong Kong, to Cape Town and now to Sussex!) and I'd like to up-grade it from an LPT to a FPT turbo. It has but 70,000 miles on the clock and everything mechanical is working...

I have a much-travelled late '93 9000CD Auto B202-engine of 1985 cc with a Bosch Jetronic ECU (it's been shipped from Hong Kong, to Cape Town and now to Sussex!) and I'd like to up-grade it from an LPT to a FPT turbo. It has but 70,000 miles on the clock and everything mechanical is working...

Hi, I am a reasonably,emphasis on the reasonably!, proficient at car diy but by no means expert. I can follow instructions exactly and I want to have a go at replacing the head gasket. I know some members have already done this and I would be grateful for examples of those problems that arose...

Hi, I am a reasonably,emphasis on the reasonably!, proficient at car diy but by no means expert. I can follow instructions exactly and I want to have a go at replacing the head gasket. I know some members have already done this and I would be grateful for examples of those problems that arose...

Was "playing around" with a Engine simulator. I've created a model of a B202 T16 and did some Iterations. I was looking for a Cam which gave the most power (HP) between 2000-8500 rpm. nothing else than IVO,IVC,EVO and EVC were changed, lift were the same(8.65mm). All other engine parameters...