Search Results for ‘aux’

Sorry I don't know if this goes in the right section. I have a 2003 Saab 9-3 linear and I bought the aux cord to install in my car, but now I need a tech 2 to add it. I was wondering if there is anyone in San Diego, CA that is willing to do it for me since I don't have a tech 2 at all. Thanks...

My wife loves this car and has been asking me if there is any way to add Aux in for her phone. After doing hours of research, I gathered enough info to be dangerous, lol. First off, this car does not have the factory Aux input in the glove compartment. Second, the Aux was not enabled on the...

:D Hi all. Became the very happy owner of a shiny new (old) 9-3 a couple of weeks ago. Arc spec, 2005. My first Saab. Trade up from a Focus of the same age with no heater, leaky boot (damp rear seats - we're talking seriously leaky...), bushings knackered, clutch fried and 280000 of your...

Right I can see from my wiring on the Delco Grundig Sat Nav (pics) there is L (+/-) R (+/-) and ground for Aux In Ive found this harness but want to be sure it works and does not need activating or so on... (pic)

Hi guys. I've decided that I want to wire in the aux feature that's both enabled via Tech II and the plug is installed in the centre armrest. Unfortunately, it appears as though there is no wiring between the Aux input and the EHU/CD Player. I have found a cable in America but I can't...

Our cam belt just frayed, and we had to nurse the car home, luckily we made it home without it snapping. Does anyone know which part number cam belt kit I need for our 9-3 1999 2.0i Saab? Thanks.

www.auxinputs.com Was going to do them myself, but too much on.

So I have a linear sport 2005, had an ICM1, upgraded recently to an ICM2. To add an Aux in and armrest power socket I acquired the loom from an Aero that goes from under the ignition lock (socket from dashboard end connects to plug, which then connects to ignition lock, handbrake sensor but also...

Help, am I missing something? My 53 plate vector convertible came pretty much with most options on it, sat Nav, 6 CD player, electric memory seats etc etc. In the armrest I have discovered an aux port, tried plugging my iPhone in with a3.5mm standard jack cable but nothing? How do I get it to...

OK so this DIY AUX option is really simple, just need a steady hand. I ensured that no two connections are touching but i still get ac crackle of interference. It is grounded to the circuit board. Any suggestions?

I have read and read about all the possible hacks but no one goes into detail about the CD player hack. What i have and know: -9-3 SE with digital climate control. -When i pulled the radio out it has the pin out sticker and shows Left, Right and Ground for a CD Changer. -I do not have a CD...

my aux is buzzing whenever i plug my ipod in to it does anyone know or give me any helpful tips 93 vector 1.9tid 06 plate

When I select AUX all I get is a buzzing, any ideas. Thanks

Hi all, just bought my first Saab (93 convertible) love the car and it drives like a dream! I've purchased a AUX kit - this one - http://www.partsforsaabs.com/product_info.php?products_id=2716 Does anyone have any instructions or info on fitting this to my ICM1? Some pictures would be helpful...

Just a quick one, I'm new so forgive me if this has been asked before... but will it work..dont see any reason why not but anyone got a memory stick connected with a usb to 3.5mm jack cable?

Hello, I've recently fitted the Aux wiring loom to the arm rest in my 2003 9-3 but am struggling to find anywhere that can Tech II enable it. Does anyone know anywhere in the South East (Croydon area) that can do this? Thanks

Well removed cd player today and attempted to remove CD. The mechanism was broken as descibed in some of the threads Ive read and I wasnt able to remove the CD, so Ive given up on that and think I will go down the AUX cable installation instead. This process looks fairly straightfoward but...

Hi all, Just brought my Saab so this my first post, loving the car :D I would like to make a lead for an aux in connection in the space in the arm rest box. I believe there was a thread on. Here about how to do it with an older unit but just wanted to know if anyone could advise me where my...