Just bought a 91 Saab with 149000. Car is in amazing condition. Engine sounds great. But the tranny only goes into P, R and N. 123 and D do not work when car is on ground. When the car is jacked up the tires will spin but with little power. I can stop them with my hands. Do I need another tranny...

Hi I had a rebuilt ZF automatic installed on my 9000 a couple of years ago and it hasn't shifted right since I got it. It clings to 3rd gear for a long time and won't stay in overdrive very well. From it shifting back and forth into d and od so harshly now it shifts into 3rd gear prematurely. I...

I have a 1991 Saab 9000 CD 2.3L N/A. Timing chain broke and bent a s*** load of valves. The problem now is finding valves? Does any one know where to find them. I only located the exhaust valves. Thanks in advance.

Hey, There is an issue with my SAAB that I will try to outline the best that I can. I have a SAAB 9000 CD (build date: October 1993). The car has 180,000km on the clock. When I turn the car on during summer the RPM gauge fluctuates up and down for about two-three seconds between 0 and 1 and...

Just what the ad said. I have paypal and used USPS as shipper thanks james

Through my contacts i have come into the possession of a 1995 saab 9000cd (2.0L) with a 2.3l turbo intercooled motor in it. It belonged to a car dealer my mate knows who gave a 9000cd to his daughter but in typical woman fashion she just drove it and didn't check the water/oil etc and she cooked...

SAAB 9000CD P REG. MOT DEC 07. FULL SERVICE HISTORY. THIS CAR HAS BEEN WELL LOOKED AFTER. UNFORTUNATELY DUE TO REDUNDANCY CANNOT AFFORD TO TAX AT MOMENT. ALSO ANTENNA HAS BEEN BROKEN IN CAR WASH. FOR QUICK SALE WILL ACCEPT £600. BARGAIN

I recently picked up #207 of 400. Anybody else out there have one? I would be interested in trading notes and knowledge concerning how to maintain and repair them or just commiserate.

I've fitted a front fog lamp switch & relay to my '97 9000CD, but am stuck when it comes to fitting the lamps themselves to the spoiler. It seems to me that I will have to take the spoiler off to fit the lamps - is this right or can the job be done more easily?

Finally the Carlsson kit has been painted and should be good to fit after giving the paint a couple of weeks to harden. One slight problem I have is that I don't have the Carlsson drivers lights to fit inside the front bumper. So I've been contemplating removing the foglight aperture covers...

Hi, looking to see if anyone has already done this to spare me from a weekend with an ohm meter... I have a 1987 900 convertible. Also have 2 1992 9000CDT's. I like the audio in the 9000's, am/fm/cassette in first unit, CD/Eq + CD changer controls in second unit, and a 6x changer in the...

Hi all, My car has 95,000ks on the clock. There is a light shudder/vibration in the front wheels somewhere. I have had the bearings checked, the tyres checked, wheels balanced and the feeing is still there - accompanied by a very quiet noise consistent with wheel rotation. Could the is the...

Hi all, My car has 95,000ks on the clock. There is a light shudder/vibration in the front wheels somewhere. I have had the bearings checked, the tyres checked, wheels balanced and the feeing is still there - accompanied by a very quiet noise consistent with wheel rotation. Could the is the...

Does anyone know if it is possible to lower a 1992 Saab 2.3l Turbo 9000CD? Ive been looking around and I can only find lowering springs for the 9000CS...Is it even possible to lower the CD? if so, does anyone know whether it intales any other modifications than lowering springs themselves? and...

Does anyone know if it is possible to lower a 1992 Saab 2.3l Turbo 9000CD? Ive been looking around and I can only find lowering springs for the 9000CS...Is it even possible to lower the CD? if so, does anyone know whether it intales any other modifications than lowering springs themselves? and...

I'm thinking about fitting reversing sensors to my 1997 9000CD. Looking at the parts CD, it looks like all I need to do is remove 4 nuts & remove the rear bumper & then remove the bit containing the foam inner, before drilling the holes for the sensors. Does this sound right to you guys?

I'm thinking about fitting reversing sensors to my 1997 9000CD. Looking at the parts CD, it looks like all I need to do is remove 4 nuts & remove the rear bumper & then remove the bit containing the foam inner, before drilling the holes for the sensors. Does this sound right to you guys?

I am a recent convert to SAABs, after years of Citroens, and I am hooked, but my 9000 non turbo auto has taken to surging on idle and runs as rough as guts, missing, hiccupping and drinking the fuel - 20l per 100km.

I am a recent convert to SAABs, after years of Citroens, and I am hooked, but my 9000 non turbo auto has taken to surging on idle and runs as rough as guts, missing, hiccupping and drinking the fuel - 20l per 100km.

Hi, All Can anyone advise whether my car would be pre wired to accept the boot mounted optional CD stacker?? If so, how and where are the wires in the boot?? Thanks Ray