Saab 900 Classic door rust

  1. Welcome to Saabscene – General discussion forum for Saab

    Welcome to Saabscene - a website dedicated to all things Saab.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Saabscene today!
     
Results 1 to 2 of 2

Thread: Saab 900 Classic door rust

  1. #1

    Saab 900 Classic door rust

    This is my first post having just started looking after a Saab 900 convertible (1990 plate). Its in relatively good order, mechanically and structurally sound and only done 80K.
    There are a few rust areas the main ones being at the bottom (inside) of both the drivers and passengers door roughly where the rubber trim attaches to the door.
    I have been to 3 body shop repairers with differing views on what action to take as follows:
    Garage #1: Generally deals with insurance claims and on inspection said I am better off with 2 new doors
    Garage #2: What I'd call an Artisan body shop, deals with classic cars and novel make overs, suggested cutting out bottom section and replacing (mainly because I offered up the suggestion that the inner door repair panel can be purchased - https://www.saabits.com/body-and-tri...=69_92_134_136) and then respraying
    Garage #3: Associated with a Saab repairer next door who does Saab body work, suggested removing rust and filling. Wouldn't recommend replacing with a new door as not easy to come by and in any case likely not to be in much better condition than I had.

    As my main aim is to keep the car as original as possible garage #1 option isn't a route I'd like to take and I agree with the thought unlikely to get a decent door anyway to replace it.
    So my options are Garage #2 or Garage #3 unless someone advises otherwise.

    Where my dilemma is is that I was of the opinion that cutting the rust out is the preferred route and that Garage #2 is the right option but Garage #2 wasn't as experienced as Garage #3 on Saab's.

    What is the recommended route from those who have done this before - do I just cut out the rust, clean it up, refill rust holes and then respray (I can do all this myself) or am I better off cutting the rust out, removing the inner door panel and then weld in a new section (Garage #2)?

    Appreciate any advice on this matter - there will be other questions in due course but this is the major item to start with.


    Thanks

    Jezza_uk

  2. Remove Advertisements
    SaabScene.com
    Advertisements
     

  3. #2

    Re: Saab 900 Classic door rust

    Hello Jezza what sort of standard do you want to get the car up to ?
    If yih want to keep it as original as possible then option number 3 seems best as long as nothing else crops up .
    But as you say option number 2 seems a good one , but even though they don't have much experience with Saabs that should not matter because a body shop is a body shop , not unless they are trying to tell you in a polite way that they don't want to do it .
    But to keep it as original as possible then in my mind
    option 3 , as it will still have the original doors .
    a point to add I've never done that kind of thing before but it seems the best way
    it's good to see someone keeping thease and preserving them so that others can enjoy them
    MSD REGISTER 26101 NOCTURNO-BLAU-MET

  4. Remove Advertisements
    SaabScene.com
    Advertisements
     

Similar Threads

  1. Viewing a Saab - bit of door rust
    By budney in forum Classic Saab 900 (1979 - 1993)
    Replies: 1
    Last Post: 08-18-2011, 09:17 AM
  2. Wanted - Classic 900 5-door left rear door Eucalyptus Green
    By SuperSwede66 in forum Saab Parts / Accessories, FOR SALE and WANTED
    Replies: 0
    Last Post: 01-02-2008, 08:43 AM
  3. Rust glorious rust
    By kloftin in forum Classic Saab 900 (1979 - 1993)
    Replies: 14
    Last Post: 07-27-2005, 03:39 PM
  4. fixing rust in door under rear-view mirror mounting
    By c900 in forum Classic Saab 900 (1979 - 1993)
    Replies: 2
    Last Post: 07-20-2005, 04:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.2