Vxr 19inch

  1. Welcome to Saabscene – General discussion forum for Saab

    Welcome to Saabscene - a website dedicated to all things Saab.

    You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, Join Saabscene today!
Results 1 to 5 of 5

Thread: Vxr 19inch

  1. #1

    Vxr 19inch

    Good morning was wondering if anyone can advise picking up a aero 2.8 saloon facelift tomorrow and was hoping to do a few mods. Was looking at putting these on 19 vxr wheels so car looks like pic has anyone done this and do I need to update suspension any problems and what tyres would you go for. Thanking you in advance

  2. Remove Advertisements

  3. #2

    Re: Vxr 19inch

    Hello 2ondeck I've done it ! And pictures to prove ( I'm running them with 20mm hub spacers ) mine are the original silver ones sprayed technical grey ( that's the colour they call it )
    my suspension is the sports ( not aero ) no mods to suspension .
    tyres I used is 235/35 ZR 19 XL , I went for jinyu gallapro ( value tyres ) all round ( not everyone's fravorite , but the grip is amazing , good all round tyre .) hope the photos help .
    Last edited by lizzard-t; 10-12-2018 at 03:03 PM.

  4. #3

    Re: Vxr 19inch

    Thanks for advice can I ask where you got the spacers from and I take it with the aero it will sit slightly lower like them in that colour.

  5. #4

    Re: Vxr 19inch

    Yes you can , I got the spacers from that well known auction site , they were made by BIMECC
    the type I got come with extended wheel bolts . There's others that bolt to the hub and you use your existing wheel bolts , to bolt them to the spacers , ( those in hindsight are the better ones because it can be a pain to line up the wheel hole , and the spacer hole and the hub whilest holding the wheel steady )
    yes yours will sit lower due to it being the aero suspension .
    that colour yet again from the auction site .
    made by Gtech, they do a package where you purchase 3 cans of top coat , 1 can of primer , 1 can of lacquer, and that's enough for 4 wheels , I was a bit doubtful, so purchased 2 sets , but they were damm right ,
    Last edited by lizzard-t; 10-13-2018 at 08:01 AM.

  6. #5
    Thanks for updates sorry for delay but car was a pile of crap and has so much wrong had to get rid of hopefully getting a 9-3 aero 2004 with 36k on clock at weekend will post results later

  7. Remove Advertisements

Similar Threads

  1. 345mm discs and calipers from a vectra vxr!
    By wallace570 in forum Tyres, Wheels, and Brakes
    Replies: 30
    Last Post: 11-22-2013, 03:11 AM
  2. 9-3ss with insignia vxr alloys.....
    By wallace570 in forum Saab 9-3 Sport Saloon / Combi(Estate)/TurboX/AWD (2003 - on)/Convertible(2004 - on)
    Replies: 7
    Last Post: 03-02-2013, 06:21 AM
  3. VXR brakes
    By StewartyBoy in forum Saab 9-3 Sport Saloon / Combi(Estate)/TurboX/AWD (2003 - on)/Convertible(2004 - on)
    Replies: 7
    Last Post: 04-15-2010, 04:31 PM
  4. Replies: 0
    Last Post: 12-11-2007, 09:58 AM
  5. Top Gear Test of Vectra VXR
    By welshwizard in forum Help, Advice, Saabs and Motoring
    Replies: 32
    Last Post: 07-31-2006, 06:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBadvanced CMPS v4.1.2